Remove the below power rails as they're going to be replaced with
different ones for better ODPM coverage.
- S8S_VDD_G3D_L2
- L9S_GNSS_CORE
Bug: 331556280
Test: Push config and verify thermal logs
Change-Id: Ic5c6cb7c4ddae258c89cbe3cb50a104f7044e016
The package name is used when signing the APEX.
Bug: 331550816
Change-Id: I06e44a7f1bb37c96de5fb66fca992c819cb85a92
Test: m com.google.camito.hardware.threadnetwork
Add this property to enable the TE2 control in the composer.
Bug: 307787644
Test: getprop | grep vendor.primarydisplay.fixed_te2
Change-Id: I493aa7471dcfd6c542d49fad07c724f50ecba3b9
Bug: 328685643
Test: Power test show ~20mW CPU power increase. but cpu profiling show CPU operation frequency are lower than before, which will limit the impact when system level CPU throttle start.
- Project11 power hint reuse "streaming_standard" with extra MIF target tuning
Change-Id: If62e93032f9f4d69caa2f74e8a4cf4b2cf68be86
Change the rule to identify wireless charge according to the latest
hda definition from bms driver pa/2736243
Bug: 324267311
Test: boot to home
Change-Id: Ice9b38201cbbe868784ac389e799cc24e8f8b7ff
This reverts commit 5a9d9cb5f2.
Reason for revert: patching race condition together
Bug: 324008766
Change-Id: I7f067b6b80a714a162a4efa6ee13a11a459ec7e6
We already have the CPU scheduler optimization for game mode to sustain
the power and perf, so remove the CPU thermal policy at lower
temperature to avoid the interfence on CPU scheduler.
Bug: 329697728
Test: run genshin
Change-Id: Ib0d47b3de7b3550a3af4db37ef062f8c5d2ea262
Latest ML models have been trained for latest HW and are no longer
valid for proto devices. We can use legacy equation prepared for
proto devices and remove any stats upload to avoid polluting stats.
Bug: 320714468
Test: Build and boot on proto devices. Check Virtual Skin output
Change-Id: Ic80934f0df80a423d8ba2cb4d1ac4b45999803fe
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Update tflite models with metadata containing input data ranges.
Enable input data validation and backup sesor.
Add offsets based off temperature ranges.
Bug: 319167815
Bug: 328789394
Test: Build and boot on device. Test backup sensor and offsets
Change-Id: Icdc0c1a1fe026613e4a1716747335e60aca4edf9
Signed-off-by: Sayanna Chandula <sayanna@google.com>
- vs formulas generated from EVT 1.1 data
Bug: 320714468
Test: push to device and boot to home
Change-Id: Ife745ac7640ffd284404212706c9bdfdb0500f33
Signed-off-by: Jikai Ma <jikai@google.com>
(cherry picked from commit 859dc39412)
supported by the BT firmware
Bug: 330484474
Test: fake fw crash in Evt 1.0 device and check the log
Change-Id: I47161dfbad12c08f854f1d616d6251845dd001ad
When device is idle, disable FW roaming (LOW RSSI roam, high band roam) to save power
Bug: 321639511
Test: Manual
Test: Build pass
Change-Id: I85873b4c6ed1c851fe95e7116feac5197cc5f1d1
Workaround Patch for BQRv6 enable
tldr:
the actual fix in Bluetooth stack is still under prebuilt process (b/329049227), this workaround is to enable BQR for debug controller issue in CM4KM4TK4 in advance. and will be reverted when the actual fix submit.
Bug: 329589582
Test: Manual test on TK4EVT1.1 (bugreport:b/329589582#comment3)
Change-Id: I505893957d7f212b00c7e760905c7b548ddc5099
Change list ver 5.0 for EVT 1.1 :
1. Tuning table for enabling AZ2.2 post mixing on b/314894838 AoC CL gpar/836677
2. Enable SA-Lite on VR path
3. Update PGC highAOP gain table for improving volume
Bug: 330096787
Change-Id: I1033781ccd9dd0eedc531e268c60b3dcee5f2054
Signed-off-by: Yixuan Jiang <yixuanjiang@google.com>
Inefficient OPPs were removed for the LITTLE cores from em table.
This change is to update the cdev ceilings in thermal policy to reflect
the EM changes
Bug: 329876112
Test: Build and boot on device.
Change-Id: I8b9ce12fc22dce0374d2a68a947bd598fd26f936
Signed-off-by: Ramya Subramanian <rsubr@google.com>
