Test: Boot to home and flash on device
Bug: 330780045
Change-Id: I6deaa4de72d289468344c3312ac44e266e225883
Signed-off-by: Peter (YM) <peterym@google.com>
This reverts previous JankCheckTimeFactor from 1.43 to 1.2.
Since the current reported duration doesn't include the GPU
part, the JankCheckTimeFactor needs to be smaller for matching
jank frame detection.
Bug: 204204746
Test: adb shell dumpsys android.hardware.power.Ipower/default;
check adpf sessions' traces.
Change-Id: I0539faf785c3a5a7cfd4dbb948b4c1506ed3be5b
- Unhide VSkin-Model to ensure thermal recorder can log
- Reduce vskin-model-legacy-diff to align with other devices
- Remove model backupsensor, since model is not used for throttling
remove backup sensor to collect more field issues.
Bug: 315948438
Test: Push config and verify dumpsys
Change-Id: I4adfcb6a13c58b15f1d97b1130d4bc0f1776f235
This CL increase SPC threshold for little core to 55, and for mid core
to 32. Tests show that in a loaded scenario, framedrop rate can reduce
to almost zero, while not impacting the power in the unloaded (baseline)
scenario.
Refer to ag/27032799
Bug: 335719478
Test: Build pass
Change-Id: I0f5926ec9ce9188c462455dfcad25f4e8d5f761f
Add Chip_Configuration_FeatureCfg_MTPL = 0 to disable MTPL
Bug: 336179125
Test: CTS/VTS, GNSS sanity test and SST in b/336424148
Change-Id: Ie13bc08afaf61569419c76c97bcc1d6eae21a5b6
1. Improved bass amount, mid range and overall loudness
2. Volume cuve tuning for media playback, notification, alarm and
ringtone.
3. Thermal throttling of the bottom speaker is initiated when the
virtual skin temperature exceeds 47°C
Bug: 336671261
Test: manual test
Change-Id: I119f8d134f839ba7b3daabe36ad049f5d1db647d
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Also reset the mask for launch and other camera streaming modes that
do not use it.
Bug: 248621289
Test: build pass
Change-Id: I754a12ac7883a4e5da44e587a28dadf0a990da3d
set SUPL UT1 timer to 20 seconds to align ixit_timer_UT1 range
Bug: 334885271
Test: config works to set UT1 timer to 20 seconds
Change-Id: I67c235de4b56f68473f4f3357b0bb69ca5c711ef
Bug: 333840723
Test: python3 dialer-cmd.py callaudio record /data/data/com.google.android.dialer/cache/record-$datetime.pcm
Test: Live caption in dialer
Change-Id: I205d816d253d8ed0dd9e6eb8f83295762e928a02
SPC threshold is too low for both Little and Mid cores. This CL increases this
threshold to 55 for Little Core and to 30 for Mid core.
Test results show lower framedrop rate in presence of background load,
without having a negative impact on the power.
Refer to ag/26943567
Bug: 335776541
Test: Build pass
Change-Id: I39d442f95215a7e72d093fd101fb4cc71840ba3d
tz_temp callback will invoke thermal_zone_device_update and return the
cached temp from thermal core. However, during device resume, the cached
temp may be reset to INVALID number before being returned.
So, change the reading path to upstream temp_show which will return the
temperature from thermistor driver directly.
Current Issue:
We are observing lot of extreme low temp for vskin being reported and
with all coefficients being positive the only way negative vskin is
reported is when thermistors report very low temp. Since abnormality
logging is rate limited this reduces the amount of ml model issues
reported.
Bug: 323987378
Test: Local build and verify lshal
Change-Id: I2445f9d654c2a86c9507bf1654dc44f3b765c889
Update it to align with the HWUI target duration scale factor,
so the adjusted jank check time duration is same as expected frame
timeline's duration.
HWUI target duration scale factor is 70%, and its inverse value is
approximately 1.43.
Bug: 204204746
Test: adb shell dumpsys android.hardware.power.IPower/default;
Check the device adpf sessions' traces.
Change-Id: Ib189b3f7993e3de1a7175cd8a054272432028b55
Disabling RILC_REQ_GPS_GNSS_LPP_PROFILE_SET because this is not
needed and may cause CP reset after NTN to NT mode switch.
Test: NTN test
Bug: 333902499
Change-Id: I7ad54b3135a57810a624a72030c1a95f2b9774a7
Second parameter is required to add PixelStateResidencyDataProvider.
If display entity name is empty, the device doesn't support display
VRR power stats.
Bug: 335379104
Test: dumpsys android.hardware.power.stats.IPowerStats/default
Change-Id: I1598bde804857e3f362ff2af1184d81618b75cb6
Signed-off-by: Darren Hsu <darrenhsu@google.com>
Set Chip_Configuration_mems_data_Configuration=0x7 to disable step counter.
Bug: 335320817
Test: Verify no step counter was registed and no more GNSS crash
issue.
Change-Id: Ia53aef1e303fb34129970570cdcca943dbe9494a