Bug: 233082034
Test: Verified on Raven that head tracker feature is set and sensor
feature CTS tests pass.
Change-Id: Ic362949f4c814101424e1fe2860d8a690fcf8477
Support 6 instances of hardware video encoder/decoder
sessions (AVC, HEVC, VP9 or AV1) in any codec combination
running concurrently at 1080p resolution@30fps.
Bug: 233775011
Test: CtsMediaPerformanceClassTestCases
Test: CtsMediaEncoderTestCases
Test: android.media.misc.cts.MediaCodecListTest#testAllHardwareAcceleratedVideoCodecsPublishPerformancePoints
Change-Id: I0f260d83164cb8b4944a4a603408400c0c3a7184
Disable the powerhint for F2FS gc_urgent mode, since we are going to
replace this with the smart idle maintenance service.
Test: turn on/off the screen & check /sys/fs/f2fs/dm-*/gc_urgent
Bug: 214430685
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Change-Id: I0798c082d668f904122c6a4af4634058dcbc777b
This reverts commit 980650080a.
Reason for revert: Since the vendor.thermal.symlinks is init early than google-module init
such as gpu cooling, the gpu cooling is not ready while creating thermal.symlinks.
Thermal-hal GPU thermal throttling will fail because there is no thermal-gpufreq-0 in thermal.symlinks.
Bug: 200615564
Test: thermal symlinks can be created in dev folder
Change-Id: Ia3b0999c7a8038f7be5e2390926ff74473c0c339
This reverts commit 58893b442f.
Reason for revert: OTA failues observed during S -> T
Bug: 228927535
Test: Full and Incremental OTA's.
Change-Id: Iec9e15d60dab92213494c9e679de6702f8d56e37
Let vendor_init adjusted the cpusets by device config from the
server. Allow us to study the performance and power impacts
by various experiment settings.
Bug: 223685902
Test: adb remount ; adb push init.gs101.rc /vendor/etc/hw/ ; adb reboot
Test: change persist.device_config.vendor_system_native.<group>_cpuset and check /dev/cpuset/<group>/cpus is also modified
Change-Id: I73369f2cef7b999cb380278503a4dbfcc4cff3cd
For imporve USB stability, limit the current to 1.3A,
when connect to accessory.
Bug: 206635552
Signed-off-by: Ricky Niu <rickyniu@google.com>
Change-Id: I2c1091aa7111e6242cc949923fbc86f27e54e976
to reduce boot time, boost ddr freq when booting
and reset it after booting.
Bug: 230586904
Test: pass
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I25b30d22a4803aeb6e27b914e07f6eb8458e0a50
This reverts commit 9b97563405.
Reason for revert: b/230265527 shows PPS malfunction impact gps location report. We need to disable PPS until PPS function fully functionality and robust.
Bug: 230265527
Change-Id: Iedd753fd243ec268268418629c2c7fa94ce57b9f
We used ACCESS_FINE_LOCATION to start a WiFi P2P connection. From
Android T, the required permission is changed to NEARBY_WIFI_DERVICES
instead.
Bug: 219855567
Test: Manual tested on Oriole. Used a local built Restore APK which
declares the use of the permission. Push that APK to the test Oriole and
validate the permission is granted by default.
Change-Id: I56924aa3e0250c94bc4fefe5d9b901b4e23d0c2b
Since the dwc3 irq is moved by USB gadget hal now, the
script is not needed.
Bug: 224699556
Test: build pass
Change-Id: Iea0aed110183d9583db00d9b182d351de41573cd
Merged-In: Iea0aed110183d9583db00d9b182d351de41573cd
(cherry picked from commit a5f995d2f6)
Since affinity permission is changed from root to system, original
permission change by script can't be used. Therefore, this patch
will move the functionality to usb gadget hal.
Bug: 224699556
Test: dwc3 irq could be located in medium/big cores after USB function switch
Change-Id: Id993db9fc303e85a9a6337a0e41b1dfd6fc9a86a
Merged-In: Id993db9fc303e85a9a6337a0e41b1dfd6fc9a86a
(cherry picked from commit f363704a92fd7611cf01c8b3bcaf6e8913255207)
Since permission change in hal rc may be late, gadget
hal would enable USB function failed. The solution will
change the permission before USB gadget hal starts.
Bug: 224699556
Test: build pass and verified pass
Change-Id: I45c1318f647220480fa03ba3b813a81b21393d71
Merged-In: I45c1318f647220480fa03ba3b813a81b21393d71
(cherry picked from commit b30924e3599f2e92aeae498a6ae15d3b9a397930)
This fixes the permissions for the [067]-001f and [178]-002f raw i2c
numberings for the P21-mainline driver which doesn't use the i2c vendor
hook to rename these numberings. This is required for the thermal hal to
work.
Bug: 231155356
Signed-off-by: Will McVicker <willmcvicker@google.com>
Change-Id: I2341c78b2ab146713a171eeb436f34c1c8839c6e
Driver actually does not support 6Ghz softAp at
current version. Hence, disable it
Bug: 231384422
Test: SoftAp can be enabled.
Change-Id: I47b39f3d31c1a94de338a2a22dc5b5495b1af1a1
