Bug: 180711938
Test: HAL loaded and accessed attributes normally
Signed-off-by: Albert Wang <albertccwang@google.com>
Change-Id: Ic0399cfe7022cc1971fc99870d955b9308512ca8
Some GCA features perform better when running in high capacity cpus.
It is set in CAMERA_STREAMING_STANDARD, so photo mode and video mode
of 30 fps will use this setting.
Bug: 188777413
Test: ta_prefer_high_cap set correctly
Change-Id: I2fd444635a352d1c6236fd82eb82e67ca1799c97
In the feature, IA would be sent early. But it met the timing issue to
customize for TMO.
The carrier id is updated too late to set the TMO parameter correctly.
Disable the feature to unblock field test first.
Bug: 188973074
Test: Flash ROM and make sure the early camping feature is off
Change-Id: Ifd8021d4944db3437c6ff51ac417b427ce04c2a1
Integrate chpp-20210325-f908420
Added SuplNiEnable (default true) to control SUPL NI
Added google LTO license key
Fixed SUPL PDU encoding error caused by structure alignment mistmatch between gpsd and gnss
Removed A-Glonass capability from ProvideCapapbilties while running LPP CP
Protection for nullptr access while receiving CAMPING_ON_LTE status from RIL
Reduced cellInfo waiting timeout from 1.3 to 1.1 sec
Add “basebandCn0” in onchip PVT
Do not stop warmstandby timers with PE2PE_WAIT_FOR_USER_TIMEOUT after receiving assist
Fix a bug to check whether there were any valid measurements which causs GPSD crash.
Added support for SatellitePVT
Keep the received acquisition assistances even after the E911 came in during the Breadcrumb req running
Add a validity check before stopping the CW combo mode test
Bug: 179616840
Bug: 187914357
Bug: 187760198
Bug: 187673164
Bug: 187011439
Bug: 187008705
Bug: 186731449
Bug: 186499722
Bug: 186490245
Bug: 186378531
Bug: 184906297
Bug: 181831996
Bug: 178148552
Sanity Test: 189009358
Test: build pass
Change-Id: Ief497c17b7d8a2e1aa232cd892d58adff689a911
"android.hardware.renderscript@1.0-impl.so" is already removed.
Remove the declaration of corresponding passthrough HAL from the
vendor manifest as well.
Test: run vts -m vts_treble_vintf_vendor_test
Bug: 184714406
Change-Id: Id7d23003c769a5872bb316090f8b94b27bc83298
We use uclamp as importance metrics for placement, before adding a
dedicated sysfs node, let us use TA default as "1"
Bug: 170487162
Test: boot
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I57b458fcab1c35b484b1859cea631cca7d495ac8
This reverts commit 72ef08cafa.
Reason for revert: using alternate method for original behavior change
Bug: 187261232
Test: build pass
Change-Id: I5643a4109f6e4a64d167ed9ee1ce0bc3492cea42
64-bit dex2oat uses slightly more memory in exchange for significantly improved compile time.
Test: boots, works
bug: 188906345
Change-Id: Ie91a2401504596cabacbb04b5d6b7039865c193d
On userdebug & eng builds, change the owner/group of SJTAG sysfs files
that need to be written to 'system'. This became necessary after these
files were migrated out of DebugFS, as write access to the world is no
longer supported.
Bug: 188817349
Test: Ensure that the writable files in the following directories have
'system' as their owner & group:
/sys/devices/platform/sjtag_ap/interface/
/sys/devices/platform/sjtag_gsa/interface/
Signed-off-by: Peter Csaszar <pcsaszar@google.com>
Change-Id: I4420fccd92522a48f44b80bd0a19f4a20eb32442
NormalPerformance is for system, and ServicePerformance is for
system-background.
Bug: 182509410
Test: build pass
Change-Id: Ifeec11de42fa880cd00b34d504bf6d8ff90dd15c
Add rebalance_interrupts to run at boot and rebalance interrupts.
Run once after modules have loaded and a second time after boot
has completed to ensure all interrupts have been assigned to
individual cores.
Bug: 148403062
Change-Id: I9685807e3028bef509c4064a5c09cbc48b91f7f0
Mostly this change just collects existing GPU-related settings into one
place so they can be found more easily. It also removes some vestigial
and redundant settings.
* Renderscript is deprecated and we never planned to include the RS HAL.
But it was copied in (twice) from some previous device. Remove it and
things that only the RS HAL depends on.
* The separate "*32" PRODUCT_PACKAGES entries were left over from when
prebuilts had separate prebuilts modules for 32-bit and 64-bit
variants of the package, instead of using a single multilib package.
Bug: 188672865
Test: boot to home, check all moved properties are still correct
Change-Id: Id9a9152b3b4c3a7167f147558f5f01da7f940311
Current mid cpu max clock is constrained by little cpu cap.
The cpu cluster clock constraint is going to be significantly reduced,
so put the current mid cap to avoid mid cpu regression.
Further fine tuning on the cap will be continued later.
Bug: 186564130
Signed-off-by: Peter Liu <pingchienliu@google.com>
Change-Id: I1e4568bb6e6167c91d8f98da337b1dd849a278bb
Revert "Directly link Lyric into GCH."
Revert "Adjust reference to libgoogle_camera_hal_tests."
Revert "Only compile camera HAL tests for primary arch."
Revert "Update commented-out GCH configuration for zebu201."
Revert "Adjust reference to libgoogle_camera_hal_tests."
Revert "Changes to support direct linking of Lyric into GCH."
Revert "Update GCH configuration for coral."
Revert submission 14596214-gch_dlopen
Reason for revert: Breaks master-without-vendor because of hardware/google/camera -> vendor/google/services/LyricCameraHAL/src dependency that needs to be broken somehow.
Bug: 188731034
Reverted Changes:
I7f1780f25:Adjust reference to libgoogle_camera_hal_tests.
Ief35ee657:Adjust reference to libgoogle_camera_hal_tests.
I9070712e1:Update commented-out GCH configuration for zebu201...
I33c989b24:Adjust reference to libgoogle_camera_hal_tests.
I8250a5874:Update GCH configuration for coral.
I76cb1957a:Adjust reference to libgoogle_camera_hal_tests.
I628ac0367:Use a single toplevel library for Lyric.
I647189d9f:Only compile camera HAL tests for primary arch.
I72cf7918b:Changes to support direct linking of Lyric into GC...
I556322b01:Update GCH configuration for gs101.
I43f7f675e:Directly link Lyric into GCH.
Change-Id: Ia72c97f4044ecac8bda438fdb917a978643cbbfe
Prefer high cap will choose the mid / high cores when possible with
consideration of energy efficiency.
Running task on high cores with low clock is more efficient than running
at little core with high clock.
This hint also addresses CTS issues with keeping latency_sensitive = 1.
(equivalent to prefer idle)
This hint adds:
1) Enable prefer_high_cap of camera vendor group
2) Set high_capacity_start_cpu to 4
4) Set MemFreq floor
5) Change camera-daemon/cpu.uclamp.latency_sensitive owner to root
Bug: 186564130
Test:
android.hardware.camera2.cts.RobustnessTest#testAeAndAfCausality (5/5)
android.hardware.cts.CameraTest#testPreviewCallback (5/5)
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRepeatingBurst (5/5)
android.hardware.cts.CameraTest#testFocusDistances (3/6). (3/6) without CL.
*****************************************************************
raven Camera CTS Test Results
*****************************************************************
Tests Passed: 217, Failed: 0, Not found: 0, Status unknown: 0
Change-Id: Ia2abb0eb9c57fa05c4db7bf1d02053e303301781
This reverts commit 3a0efffdbc722cb8a9684ce3c0080d2476c0abb8.
Reason for revert: This CL causes performance/frame drop issues which leads to more CTS flakiness.
Bug: 188462637
Bug: 185233206
Test: Camera CTS
Change-Id: I1796ba29da0e2c19874531bda8c21bc10e248055
