New version of thermal engine (Powerlink v2) uses ODPM data for
thermal mitigation. But proto devices does not support ODPM.
Currently we have disabled thermal mitigation for all A0 based
devices through a separate config, thermal_info_config_A0.json.
This change restricts using separate thermal config only for the
proto devices and uses thermal_info_config.json for the rest.
Fix a format issue with qi-quiet sensor definition.
Bug: 196478280
Test: Build and boot on device. Check thermal config
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I0922e935cafe118f3437335e2a72b87aae6f6009
FM table Changelist:
1. C10 HA NB/WB/SWB: fine tuning for EVT1.1
2. C10 HA NB/WB/SWB: FFP parameter update (enable)
Bug: 216258666
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ia4dcb8dd19d4aaf7fa4150a3cdacb9d455994ac6
update new boost uclamp value since we update
cpu capacity
Bug: 224649226
Signed-off-by: Taeju Park <taeju@google.com>
Change-Id: I49b38af1000ecb750acf94807547670941881b31
Update virtual-skin, virtual-skin-charge and cellular-emergency
sensors to 0.5 version coefficients.
Added "Version" field for virtual-skin node for identifying the
version of coefficients.
Bug: 229418131, 227477863
Test: Build and boot on device. Check virtual-skin readings
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I709fa1dfa5304416335bba1a7cb21a267e00c744
[P10/C10]
Phasing out config_roundedCornerMultipleRadius config from device
overlay package.
Bug: 224688507
Test: Build ROM and pass presubmit test
Change-Id: I325157ca5163d9c429724000be73c07728fbdc45
add potential paths for i2c peripheral devices
sine we enable parallel module loading
Test: without error log on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I2afcf5d9255cd821a3bb9136d032b82782f396b3
Since the behaviors of Wifi/LTE coex avoidance for GPS L1 between C10 and P10 are difference, we need two independent overlay for C10 and P10.
For ravenclaw and cloudripper, they follow the overlay of C10 since they are only for developing purpose.
Bug: 228415213
Test: Overlay config can be read correctly.
Change-Id: I4323682686d8f83b584f2a56f01ebe8ea831cb43
High throttling was observed on BIG cores resulting in device
sluggishness when the skin temperature hit LIGHT severity.
Current Tj control temp is set to 75 degC when LIGHT severity
is set for A0 based devices. This change is to increase the
Tj control temperature to 80 degC, same as B0 soc.
Bug: 229682004
Test: Build and boot on device. Check Tj control temperature
setting at LIGHT severity
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I67219937f89a9edec6fcf6083f4814d29ef600f2
Bug: 229727068
Test: Manual. Flash the device with the binary including this change and check adb logs. ERR_AUTO_PROVISIONING_DISABLED should not be printed.
Change-Id: I826f86c9943573d25ffeb1ac9761a29c03bf4cc9
This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.
Bug: 226659256
Test: make
Change-Id: I70010daf45186235a48633355b5641b38597b2d6
Add a virtual sensor for USBC overheat protection and messaging to
UI. Bind overheat protection sensor with USBC cooling device.
Bug: 222577017
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I6f3cdc01fedfd152382a2d5370e22e0acf6cb3ba
Bring back old usage of status_bar_height, status_bar_height_portrait,
and status_bar_height_landscape by set the size containing cutout size.
Bug: 216782082
Test: make
Change-Id: Iff388639497a7955e363c3372d79ead35831bea5
Bug: 228808192
Test: Local test to verify no polling
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I6a0a0fa240e199a3ccf47138b3204679fd3f6eed
This property prevents display high brightness mode from being triggered
due to HDR layers produced by camera.
Bug: 218728138
Change-Id: I772d6c73e877661a2296a448725e9a0ca247ed07
Change list:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 198765357
Test: Builds
Change-Id: Ia51415f64b429cd79afaee709a8b16bc33d1edcc
Signed-off-by: Robert Lee <lerobert@google.com>
fast_swtich1.txt => Enable FIR of top amp
fast_swtich2.txt => Enable FIR of bot amp
fast_switch3.txt => Disable FIR of top amp
fast_switch4.txt => Disable FIR of bot amp
Bug: 214487028
Test: Build pass
Change-Id: Id7c9eae52d9e59250cbc7e79705d86d0268a7a79
Signed-off-by: Robert Lee <lerobert@google.com>
Changelist:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 199029784
Test: Builds
Change-Id: I8e54a63830a32a4d41f257a5187d722ec199a368
Signed-off-by: Robert Lee <lerobert@google.com>
