paths are changed when we enable parallel module loading and
reorder the initializtaion of devices.
Test: without avc denial on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ia94bccdf479262e96210c2eda4794c2708e56861
Modified the outdoor range mapping in
the outdoor auto-brightness curve.
Bug: 213251504
Test: check the default curve
Change-Id: I387e87f343ffe7af72fb965f2c7ea05eb85dfda1
FM table Changelist:
C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
(1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
(2) Handsfree RX to HCO RX
Bug: 216258666
Test: b/216258666#comment19
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e
Modify name from sysfs_vendor_sched to proc_vendor_sched
Test: without avc denial
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie8fdb9e6634fb160f5cea64883bead93be13d93e
Add touch module into the init.insmod.xxx.cfg, it will be loaded after
all common modules in late-init. So the touch module won't be loaded in
off-mode-charge.
Bug: 227269826
Bug: 226881266
Test: Verify pass that the touch module is not loaded in off-mode-charge.
Change-Id: I3f3153afb75355020e17534838410050f20f02b2
FM table Changelist:
C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199
- Create separate powerhint json files for a0 soc
- Add control/switchon powerhints for all IPs
- Change thermal severity level to LIGHT
- Update trip temps as per policy
Bug: 194509203
Test: Build and boot on device. Check change of trip temperatures
after the thermal severity of LIGHT
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ibd19ea16d0fee25dec801b287e1eab05699a8d7f
Add cold temperature policy to combat sharp SOC% drop
Bug: 223420221
Test: Local peak current shock test at cold temperature
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If1db429a6c6c181735af001a72372f63a59d01c4
There is no swiotlb usage so we can append noforce to
remove 2MB reserved memory.
Bug: 226578178
Test: check total memory and io_tlb_nslabs
Signed-off-by: Martin Liu <liumartin@google.com>
Change-Id: I746e8a1d18d78243bfe6a0b7549d5cf09cc4e227
Due to b/214429812, QURGENT currently is not working properly, and cause
easily see EBUF full when capture on GCA. Temporary increase MIF clock to
mitigate memory interface congestion. We should revert this when
b/214429812 fixed.
Bug: 223734867
Test: P22 GCA capture
Change-Id: I0cc16d5bd83cb23462147c44547077665bc1dc73
Delay between NFC start and kernel has increased
This patchs update this delay to avoid lock at start
Bug: 223228405
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: I1c91c73e420315e67ecfb076f90a0fcc20deb3fe
Update target load due to Pro mid CPU
this hint impact the high streaming use case like 60fps / 120fps and
240fps.
Bug: 222570798
Test:
1080p60 frame drops: 0.3% (before 3%)
slow mo 8x: frame drop 0%. 300mW saving on mem path
GCA test
CTS no regression
Passed:Tests Passed: 358, Failed: 4, Not found: 0, Status unknown: 0
Change-Id: Ie53f6eaadadf3540cf9a7b6cf7b801d46e943098
Bug: 225351394
Test: Verified twoshay not running in charger mode using cereal (P31701277).
Signed-off-by: Mark Chang <changmark@google.com>
Change-Id: Iad139a8340f5a8e6ee53ba434edc3b98379f68e2
Update uclamp_min to keep the little cores boost running on the same
frequenices.
Bug: 220975075
Test: build and boot to home
Change-Id: Idfc12229ec372288c29b61e2d965e13e480476e5
Add these property for the development on userdebug and eng only on P22.
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ic80ffbbfdcafda4bba9ed6edf01002d3db7e0c0b
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == true
use audio_policy_configuration_a2dp_offload_disabled.xml (a2dp X LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
(ro.bluetooth.leaudio_offload.supported == false OR persist.bluetooth.leaudio_offload.disabled == true)
use audio_policy_configuration_le_offload_disabled.xml (a2dp O LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
ro.bluetooth.leaudio_offload.supported == true AND persist.bluetooth.leaudio_offload.disabled == false
use default audio_policy_configuration.xml (a2dp O LE O)
Note:
The above settings are based on ro.bluetooth.a2dp_offload.supported == true condition
If ro.bluetooth.a2dp_offload.supported == false, the content of the default audio_policy_configuration.xml
file must be replaced by audio_policy_configuration_a2dp_offload_disabled.xml on the target
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I4a9bd45c1341100217ab32fd81f7421af00e059d
* set SarBackOffHighResolution = true for support power index
from 0 to 80 for setting backoff in 0.25 dB step
Bug: 170369474
Test: sending sar command with power cap index between 20 ~ 80 and
confirm the SAR backoff is workable.
Change-Id: I56d75abcff55e93554bf656fff164b861fe0e3c2
Disable wireless charging during drain, usb charging,
and charger stress test
- vendor.disable.wlc 1
If device is placed onto dreamliner and shutdwon(drain out),
it would boot up by DC_CHG and keep shutdown(0%)-boot up
(by DC_CHG) continuously. To avoid this symptom, limit wireless
current_max as 75000 after device boot up
- persist.vendor.limit.wlc.current=1
How to verify:
adb shell setprop vendor.disable.wlc 1
adb shell cat /sys/class/power_supply/wireless/online >>>> 0
adb shell setprop persist.vendor.limit.wlc.current 1
adb shell cat /sys/class/power_supply/dc/current_max >>>> 75000
Bug: 204211357
Test: set the property manually and query the result from file node.
Change-Id: I3ae2460f964b12924c3432d7f84203e2d802aa5f
Signed-off-by: Ken Tsou <kentsou@google.com>
(synced from commit 6e0bb1cb11b05768d04767e85cd28eaef212f305)
Disable the powerhint for F2FS gc_urgent mode, since we are going to
replace this with the smart idle maintenance service.
Test: turn on/off the screen & check /sys/fs/f2fs/dm-*/gc_urgent
Bug: 214430685
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Change-Id: I3e7fc4efdd6eed0a61fb2cedf3620907fece226d
