1. Handset : Sync SU0 setting to QPR
2. Headset :
a) Modify RX DRC to compress the noise floor which is coming from 8 bit process on CCA
for all of BT modes with NB/WB
b) Consistent mixer setting for RX1 and RX2:
BT disable mixer on RX2
Headset disable mixer on RX2
c) Low RX FENS on BT
#CASE_NAME BLUETOOTH-BTNB-RESERVE2-SWB
d) Enable RX low latency to compensate the long delay
For Headset modes
3.Handsfree :
a) modify Light NS for cust2
b) sync SU0 setting to QPR
Bug: 245658052
Test: manual test b/245658052#comment4
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ia833a0e63c85503cec8af8ec3864c588e6414e6a
gChips discovered potential issues with this frequency, and has recommended its removal.
This also updates thermal hard-limits to reflect the removal of one
operating point.
Bug: 240479599
Test: Boot to homescreen
Change-Id: If16a65550b85a4a4a66cdcd3b5bd7e31d7e7dc88
Signed-off-by: Siddharth Kapoor <ksiddharth@google.com>
With systemui now changed its cpuset in early stage, we no longer
need RestrictedCpuset hint as workaround.
Bug: 242775562
Test: build pass
Change-Id: I108cf0683fe80bfb50b3b8012954129dc1c40a54
Move lhd.conf, scd.conf to device folder and maintain them separately by project requirement
Bug: 244258007
Test: confirm the configurations are correct
Change-Id: I42acbfda84e4c6eab6d95b99b100edfa99f7a704
* set BtA2dpOffloadCap value to sbc-aac-aptx-aptxhd-ldac-opus
in bt_vendor_overlay.conf to suppot OPUS offloading.
Bug: 243958304
Test: manully
Change-Id: I0482a86584ad0ae36daff810a1c853e8edffd375
- update script for restricted channels
- set UWB-calibration_fcc.conf as UWB-calibration.conf which will served as default and unknown configuration
Bug: 240199018
Test: Verified with local build
Signed-off-by: Rex Lin <rexcylin@google.com>
Change-Id: I2dc2e2c57ab145afcdd0c2fd50682f5d8ee5ba2b
To meet the av sync, we need to adjust the uc latency
for immersive playback.
Bug: 243645548
Test: Test with av sync video
Change-Id: Iac25dc58032dc9b070885c7c425d00b6d2c98c4c
Change the value to wait on the get session state and start command on
SE side to an optimal value after tuning
Bug: 237644730
Test: see b/237644730
Change-Id: I8ae99a1d85df55cc2ba8ab372c8879a7abdb8eb3
The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Change-Id: I6f471aed60b56862ba9a8b0bb12d50ef6305faba
Allow these devices to send CPU hints to PowerHAL from SF to reduce
drops and save power.
Bug: 195990840
Test: manual
Change-Id: Idb7dad41852c71bff9b3c63d2d75849128288080
(cherry picked from commit 2dd1a62ca4)
This reverts commit 7e2cc1ebbe.
Reason for revert: Move throttling back to userspace
Bug: 239887528
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I4ef3851a7163e50ed95862ba99330046634e032c
The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Change-Id: I803badb16c67aba741b0804485a714bd5b179223
- Separate thermal config for charger mode and remove the unused thermal
throttling.
- Move charger pixel-thermal-symlink from common to project folder
to prevent the GKI version dependencies from blocking init.
Bug: 240897207
Test: usbc overheating protection and charging throttling worked
properly in charger.
Change-Id: I0ba3dabcc8c0c74e7e9334bc04a6fac875ac6b6c
Adjust the latency for BLE audio and others for av sync result.
Bug: 241898786
Test: Play AV sync video
Change-Id: I3ed43eac0b2e3a4d7ca9e8c8003654d3b0ba4e3a
Instead of using hard-coded GPU freq, tune
DVFS period instead.
Test: Boot
Bug: 239887528
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I53415fb5c5390adace99b593495c6388b3232cd0
