Set it to "reset" in order to reset ST54K eSE at NFC hal init.
Bug: 232204531
Test: check eSE reset process starts at boot
Change-Id: I9f5863f963716ddceabbd540fbde32abec0a38b4
Add power hints handling for EMERGENCY severity. Control temperature
and switchon temperature are lowered when the pwoerhint is received.
Remove power hint handling for isp thermal zones as PID control loop
is not enabled for isp as of now.
Bug: 229014824
Test: Build and boot on device. Check control/switchon temp when
thermal severity reaches EMERGENCY level
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I2e4bab9495d76e231df8277f3bf4ef68d5a141af
vendor_config plays as another role to control the display config during
the boot time. To change the default configuration of the user selected
mode, we use persist config to store the value.
Bug: 232721840
Test: Boot w/ and w/o user selected configs and check the resolution
Change-Id: I8e6f551817e9b7cb747a7f5351430dd2ac9b4624
- preview of notification will be cut off slightly becuase of mute
duration in framework is 160ms (40*40)
- set mute duration of primary output from 160 ms to 40 ms.
Bug: 233176336
Test: preview notification/end call sound on voice/VoIP(Line)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I7f5225372c265cb22e74311b0805d16b1c68fd3d
Modified the indoor range mapping in
the indoor auto-brightness curve.
Bug: 200227638
Test: check the default curve
Change-Id: I7b9219023fabdefe05cb910666c0e0ff998ed06c
Since runtime resolution switching is enabled, the specific device
supports to run QHD displays at lower FHD resolutions. So we should
support both QHD/FHD resolution settings in PowerStats HAL.
Bug: 232313626
Test: dump power stats at QHD/FHD resolutions
Change-Id: I46a45c078da146a8ecbeb49af4765771a2c0b651
Signed-off-by: Darren Hsu <darrenhsu@google.com>
Update C10 virtual coefficients as per v0.6. No changes for P10
Bug: 232303785
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I2662aba527265d67acb1f5237e550eff75347ca8
we need disable uclamp_threshold and reduce_prefer_idle
under launch scenarios.
Bug: 232593932
Test: build pass
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I4b1f1fa04ee7c89f25500df74db49ad2fb67b2cb
Fix C10 AoA polarity by modifying LUT in config file
Bug: 233072004
Change-Id: Ic163f03efa14f3af38fff92902241cd09516546f
Signed-off-by: Victor Liu <victorliu@google.com>
No need to prevent uclamp.min update rate by Granularity.
There is no perf impact.
Bug: 232336917
Test: /data/nativetest64/libperfmgr_test/libperfmgr_test
Change-Id: I535a57b68da9e9b37f4126e46d0410ccb410be46
The impact of the change only aims to users who have never configed RRS
and those who do factory reset themselves.
Bug: 232536153
Test: factory reset the device and check RRS setting in FHD+
Test: configure RRS and check the config is stored after rebooting
Test: disable smooth display and check the expected refresh rate
Change-Id: I01c46ac2566f0b060fcf23a092601f05bbf568cb
Task packing has slightly impact for camera performance, so disable
it when camera is running.
Bug: 231074255
Test: build pass
Change-Id: Ic375103d4f7200dbceb013495c127e4a38d84654
Change list:
1.Set fallback value for repair center(not impact tuning)
Bug: 199029784
Test: Builds
Change-Id: Ia58aec716eb697d483a25f00e5244a3ea8ee8e70
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1.Set fallback value for repair center(not impact tuning)
Bug: 198765357
Test: Builds
Change-Id: I9c68a737ea1854e458e3b57b47a1c227a4f4a4bd
Signed-off-by: Robert Lee <lerobert@google.com>
Refine AZ and Surround recording parameters and related IIR2 tuning
Bug: 232162570
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I2cc34f9fd106578a4e2693b5183aa8879cf70465
Task packing may hurt app launch time, so disable it when app launch.
Bug: 201259891
Test: hint works
Change-Id: Ia28e96a25bbb82c74a3c9761a89683b2cc05938c
add mic gain on path "speaker-mic" from 0 to 22
Bug: 231909998
Test: mmap record
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I66de7c52c29ec3434a5cbed1799029fa5be05f71
AAC-VBR is more prefered than AAC-CBR for A2DP playback.
Bug: 200101304
Bug: 229939538
Test: dumpsys bluetooth_manager
Change-Id: I8930fdf383a4bbe481371b4aa4379f554bb9bd15
