This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.
Bug: 226659256
Test: make
Change-Id: I70010daf45186235a48633355b5641b38597b2d6
Add a virtual sensor for USBC overheat protection and messaging to
UI. Bind overheat protection sensor with USBC cooling device.
Bug: 222577017
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I6f3cdc01fedfd152382a2d5370e22e0acf6cb3ba
Bring back old usage of status_bar_height, status_bar_height_portrait,
and status_bar_height_landscape by set the size containing cutout size.
Bug: 216782082
Test: make
Change-Id: Iff388639497a7955e363c3372d79ead35831bea5
Bug: 228808192
Test: Local test to verify no polling
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I6a0a0fa240e199a3ccf47138b3204679fd3f6eed
This property prevents display high brightness mode from being triggered
due to HDR layers produced by camera.
Bug: 218728138
Change-Id: I772d6c73e877661a2296a448725e9a0ca247ed07
Change list:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 198765357
Test: Builds
Change-Id: Ia51415f64b429cd79afaee709a8b16bc33d1edcc
Signed-off-by: Robert Lee <lerobert@google.com>
fast_swtich1.txt => Enable FIR of top amp
fast_swtich2.txt => Enable FIR of bot amp
fast_switch3.txt => Disable FIR of top amp
fast_switch4.txt => Disable FIR of bot amp
Bug: 214487028
Test: Build pass
Change-Id: Id7c9eae52d9e59250cbc7e79705d86d0268a7a79
Signed-off-by: Robert Lee <lerobert@google.com>
Changelist:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 199029784
Test: Builds
Change-Id: I8e54a63830a32a4d41f257a5187d722ec199a368
Signed-off-by: Robert Lee <lerobert@google.com>
paths are changed when we enable parallel module loading and
reorder the initializtaion of devices.
Test: without avc denial on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ia94bccdf479262e96210c2eda4794c2708e56861
Modified the outdoor range mapping in
the outdoor auto-brightness curve.
Bug: 213251504
Test: check the default curve
Change-Id: I387e87f343ffe7af72fb965f2c7ea05eb85dfda1
FM table Changelist:
C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
(1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
(2) Handsfree RX to HCO RX
Bug: 216258666
Test: b/216258666#comment19
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e
Modify name from sysfs_vendor_sched to proc_vendor_sched
Test: without avc denial
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie8fdb9e6634fb160f5cea64883bead93be13d93e
Add touch module into the init.insmod.xxx.cfg, it will be loaded after
all common modules in late-init. So the touch module won't be loaded in
off-mode-charge.
Bug: 227269826
Bug: 226881266
Test: Verify pass that the touch module is not loaded in off-mode-charge.
Change-Id: I3f3153afb75355020e17534838410050f20f02b2
FM table Changelist:
C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199
- Create separate powerhint json files for a0 soc
- Add control/switchon powerhints for all IPs
- Change thermal severity level to LIGHT
- Update trip temps as per policy
Bug: 194509203
Test: Build and boot on device. Check change of trip temperatures
after the thermal severity of LIGHT
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ibd19ea16d0fee25dec801b287e1eab05699a8d7f
Add cold temperature policy to combat sharp SOC% drop
Bug: 223420221
Test: Local peak current shock test at cold temperature
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If1db429a6c6c181735af001a72372f63a59d01c4
There is no swiotlb usage so we can append noforce to
remove 2MB reserved memory.
Bug: 226578178
Test: check total memory and io_tlb_nslabs
Signed-off-by: Martin Liu <liumartin@google.com>
Change-Id: I746e8a1d18d78243bfe6a0b7549d5cf09cc4e227
Due to b/214429812, QURGENT currently is not working properly, and cause
easily see EBUF full when capture on GCA. Temporary increase MIF clock to
mitigate memory interface congestion. We should revert this when
b/214429812 fixed.
Bug: 223734867
Test: P22 GCA capture
Change-Id: I0cc16d5bd83cb23462147c44547077665bc1dc73
