Move the powerhint.json from gs201 to pantah.
Separate powerhint.json for each device.
Test: build and manually check
Bug: 207573241
Change-Id: I32d9093e48ca5f62cf0d05ec43a8b77b99ed254d
Change list:
1. set Top speaker Tmax to 105 degC for Waves tuning
Bug: 199029784
Test: Builds
Change-Id: Ie7274f01f831a1b3e17c929472ebffe9d0f1d2a1
Merged-In: Ie7274f01f831a1b3e17c929472ebffe9d0f1d2a1
Signed-off-by: Robert Lee <lerobert@google.com>
(cherry picked from commit e6bf777674)
Change list:
1. Re-characterized speaker model on top speaker due to a design change
2. set Tmax to 105 degC for Waves tuning
Bug: 198765357
Test: builds
Change-Id: Ib1793b25c58aed5f7e4df2ff07b11f0cebf876da
Merged-In: Ib1793b25c58aed5f7e4df2ff07b11f0cebf876da
Signed-off-by: Robert Lee <lerobert@google.com>
(cherry picked from commit 52798a52d71d972415dc4964ec18591f177cc620)
Change list:
1. set Top speaker Tmax to 105 degC for Waves tuning
Bug: 199029784
Test: Builds
Change-Id: Ie7274f01f831a1b3e17c929472ebffe9d0f1d2a1
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1. Re-characterized speaker model on top speaker due to a design change
2. set Tmax to 105 degC for Waves tuning
Bug: 198765357
Test: builds
Change-Id: Ib1793b25c58aed5f7e4df2ff07b11f0cebf876da
Signed-off-by: Robert Lee <lerobert@google.com>
Align configuration as following.
1. Dual AP interface
2. verbose logging always on
3. hotspot MFP
Bug: 219927253
Test: dual hotspot can be turned ON and client can connect to hotspot
Change-Id: I0885b55c37135fe632b597bc605a8f281c0448b2
Turn on Smooth Display in Settings App by default. Users can disable it
in Settings App.
Bug: 219650450
Test: Smooth Display is enabled by default after factory reset
Change-Id: I3acc5d548bad8a5068a75140673512ba793890e8
The calibration script will be copied higher level device uwb.mk
Bug: 219611318
Test: builds
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: I68175f99e063bd196555929fd2c55e848c3c360a
Add cellular-emergency sensor with same virtual
coefficients as virtual-skin, but a 54 degC
emergency threshold.
Bug: 216391268
Test: build and boot on device.
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I8d6178b228ffaf31b80341efb4a78e681940bb47
Lower thermal shutdown temeprature to 55 degC to renable
shutdown for all HW revs and usecases
Bug: 204522715
Test: build and boot on device. Run a workload and check
thermal shutdown
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I10ca928cf8639f279b9dcb1d609d0bb8c7ed2c29
1. [C10]Remove duplicate config_frontBuiltInDisplayCutoutProtection
2. [C10]Shift right config_frontBuiltInDisplayCutoutProtection position
3. [P10]Shift down config_frontBuiltInDisplayCutoutProtection position
Test: make and flash + enable rounded corner debug + launch front camera
Bug: 199469413
Bug: 203593020
Bug: 199468172
Change-Id: Iec8aaefe9ac649940d2364a95c12c75b69e34871
Bug: 204271052
Test: voip with speaker mode
atest dual_speakers_test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I3bb59bf5444a537230c1dc3a4f74bd68ec209f4e
Use device specific script to select which factory calibration
values to use.
Bug: 218719905
Test: on device
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: Ie5adea6ce7b15c762a1c09a50b0a872465dcd3eb
This reverts commit 0952694db7.
Added cooling devices for TPU/GPU and hence can bring back
the dependency
Bug: 218541675
Test: build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Idd664160d5f9c30ad9c44221a7f0129315f1e415
Bug: 218541675
Test: Boot and confirm state change on device
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I17bef07a9d6414617b5fd44c75661da146ac67ff
We will have a 'vendor' project containing proprietary blobs
to be able to build and flash Pixel device when vendor source is not
available.
The project names are
platform/vendor/aosp/google_devices/cheetah
platform/vendor/aosp/google_devices/panther
and the paths are
vendor/google_devices/cheetah
vendor/google_devices/panther
TEST:make and flash a panther device
BUG: 217478568
Change-Id: Ibddebeab3cca4b4dfab12be519a099ca60ddd0c7
This CL updates resource overlay of
rounded_corner_content_padding
so that the same device-specific value can be seen from both the
Framework code and the SysUI.
With my previous CL [1], the SysUI continues to see the same value
even after this migration.
[1]: I0c3717c0bdfc928167c6eba06247b37caabf33b9
24d6b891f572f7be419d3acc9793ca68d062cf35
Bug: 215554582
Test: presubmit
Change-Id: I373b59068959d96f46f8d2d48e4923fbe8c961c8
