16d4e31f10
The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Change-Id: I6f471aed60b56862ba9a8b0bb12d50ef6305faba
117 lines
4.5 KiB
Text
117 lines
4.5 KiB
Text
# Cheetah/Panther specific init.rc
|
|
|
|
on init
|
|
# NFC streset tool name
|
|
setprop persist.vendor.nfc.streset libstreset21
|
|
setprop persist.vendor.se.streset libstreset21
|
|
|
|
on init && property:ro.vendor.factory=1
|
|
import /vendor/etc/init/hw/init.factory.rc
|
|
|
|
on early-boot
|
|
# Wait for insmod_sh to finish all common modules
|
|
wait_for_prop vendor.common.modules.ready 1
|
|
start insmod_sh_pantah
|
|
|
|
service insmod_sh_pantah /vendor/bin/init.insmod.sh /vendor/etc/init.insmod.${ro.hardware}.cfg
|
|
class main
|
|
user root
|
|
group root system
|
|
disabled
|
|
oneshot
|
|
|
|
on property:vendor.mfgapi.touchpanel.permission=1
|
|
chmod 0600 /sys/devices/virtual/sec/tsp/cmd
|
|
chown system system /sys/devices/virtual/sec/tsp/cmd
|
|
|
|
# Fingerprint
|
|
on post-fs-data
|
|
chown system system /dev/goodix_fp
|
|
exec_background - system shell -- /vendor/bin/trusty_apploader /vendor/firmware/g7.app
|
|
|
|
# Overrides fingerprint antispoof if following persist sysprops are set
|
|
on boot && property:ro.build.type=userdebug && \
|
|
property:persist.vendor.fingerprint.disable.fake.override=0
|
|
setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}
|
|
|
|
on boot && property:ro.build.type=userdebug && \
|
|
property:persist.vendor.fingerprint.disable.fake.override=1
|
|
setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}
|
|
|
|
on boot && property:ro.build.type=userdebug && \
|
|
property:persist.vendor.fingerprint.disable.fake.override=100
|
|
setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}
|
|
|
|
# WiFi
|
|
on post-fs-data
|
|
setprop wifi.direct.interface p2p-dev-wlan0
|
|
setprop wifi.aware.interface aware_nmi0
|
|
|
|
# Speaker amp permission
|
|
chmod 644 /mnt/vendor/persist/audio/speaker.cal
|
|
|
|
# Allow secure_element group to read / write ST33 SPI state
|
|
chown secure_element secure_element /sys/class/st33spi/st33spi/st33spi_state
|
|
chmod 0660 /sys/class/st33spi/st33spi/st33spi_state
|
|
|
|
# Persist
|
|
on post-fs-data
|
|
chmod 770 /mnt/vendor/persist/display/hdr_cal_v1
|
|
chmod 770 /mnt/vendor/persist/display/hdr_cal_v2
|
|
chmod 770 /mnt/vendor/persist/display/sdr_cal_v1
|
|
chmod 770 /mnt/vendor/persist/display/sdr_cal_v2
|
|
chown system system /mnt/vendor/persist/sensors/registry/vd6282_spectral_fac_cal.reg
|
|
chmod 600 /mnt/vendor/persist/sensors/registry/vd6282_spectral_fac_cal.reg
|
|
|
|
# NFC
|
|
on property:ro.boot.hardware.revision=PROTO1.0
|
|
setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf
|
|
|
|
on property:ro.boot.hardware.revision=PROTO1.1
|
|
setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf
|
|
|
|
# Bluetooth
|
|
on post-fs-data
|
|
chown bluetooth system /proc/bluetooth/timesync
|
|
|
|
# SecureElement eSE2 cts mode
|
|
on property:persist.vendor.se.ese2.mode=ctsmode
|
|
write /sys/class/st33spi/st33spi/st33spi_state 33
|
|
|
|
on init && property:ro.boot.hw.soc.rev=0
|
|
setprop vendor.powerhal.config powerhint-a0.json
|
|
|
|
on property:ro.boot.hardware.revision=PROTO1.0
|
|
setprop vendor.thermal.config "thermal_info_config_proto.json"
|
|
|
|
on property:ro.boot.hardware.revision=PROTO1.1
|
|
setprop vendor.thermal.config "thermal_info_config_proto.json"
|
|
|
|
# Touch
|
|
on property:vendor.device.modules.ready=1
|
|
chown system system /proc/focaltech_touch/Channel_Num
|
|
chown system system /proc/focaltech_touch/FW_Version
|
|
chown system system /proc/focaltech_touch/INT_PIN
|
|
chown system system /proc/focaltech_touch/force_active
|
|
chown system system /proc/focaltech_touch/Reset_Pin
|
|
chown system system /proc/focaltech_touch/fw_grip
|
|
chown system system /proc/focaltech_touch/fw_palm
|
|
chown system system /proc/focaltech_touch/heatmap_onoff
|
|
chown system system /proc/focaltech_touch/mf_mode
|
|
chown system system /proc/focaltech_touch/selftest/Baseline
|
|
chown system system /proc/focaltech_touch/selftest/Noise
|
|
chown system system /proc/focaltech_touch/selftest/Panel_Differ
|
|
chown system system /proc/focaltech_touch/selftest/Rawdata
|
|
chown system system /proc/focaltech_touch/selftest/Rawdata_Uniformity
|
|
chown system system /proc/focaltech_touch/selftest/Scap_CB
|
|
chown system system /proc/focaltech_touch/selftest/Scap_Rawdata
|
|
chown system system /proc/focaltech_touch/selftest/Short
|
|
chown system system /proc/focaltech_touch/selftest/Strength
|
|
|
|
# Override SF and RE uclamps to 0 on boot after being set elsewhere, for adpf cpu hints
|
|
on property:sys.boot_completed=1
|
|
trigger override-sf-uclamp
|
|
|
|
on override-sf-uclamp
|
|
write /proc/vendor_sched/rt_uclamp_min 0
|
|
write /proc/vendor_sched/sf_uclamp_min 0
|