<Change List>
For mixer_paths.xml to both O6 & R4,
1. Add default value for "MIC Record Soft Gain (dB)" control to accommodate with b/189498328.
2. Update below path name to move compensation gain from "MIC HW Gain At High Power Mode (cB)" to "MIC Record Soft Gain (dB)" to fix recording concurrency issue(b/189294476).
- <path name="handset-mic">
- <path name="speaker-mic">
- <path name="camcorder-mic">
- <path name="voice-recog-mic">
- <path name="unprocessed-mic">
- <path name="unprocessed-dual-mic">
- <path name="unprocessed-triple-mic">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
2. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
3. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: basic record pass
Change-Id: I3f7759e6998f419a3d7d87b032d8088f5bc7dac0
Previously, we defined a list of kernel modules that should be
excluded from the vendor_boot image. (Those modules are loaded
from the vendor_dlkm partition during second stage init.)
Going forward, we import a list distributed by the kernel build that
explicitly defines the kernel modules to included in the vendor_boot
image.
Bug: 190652328
Change-Id: I8d67bfdaa121ddd82dc9e493c9b18cebdc05233c
1. Support more camcorder tuning with different channels
2. Update the latest params on WNR, SUR, Linear gain, MBDRC module.
Bug: 181869495
Bug: 186721091
Bug: 174448901
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I969b9bbb6a3fd74206dfc0bf385d9ebc1fddf194
Oriole WHI A updated.
Bug: 188365095
Test: Confirm throttling based on criteria matched
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Ic3dcb7ed7af8aa40f56087fa72603e21c5c6b1ec
Set Zone 2: < 30 Lux and UI brightness 45%. Lock 90Hz
Set Zone 3: > 50,000 Lux and UI normal brightness 100%. Lock 60Hz
Bug: 187929149
Bug: 190018500
Test: no refresh rate chagne in the blocking zone
Change-Id: Iffe10c76cfff1c8eac9361e68a10377d26b48d10
//O6
1. HA NB/WB/SWB/FB : Mic blocked paramter temp disable
2. HH NB/WB/SWB/FB: Mic blocked parameter temp disable
3. HA FB EVT modification
4. HH FB EVT modification
=> Mic design change : FB TX pre-FdEQ
=> RX Distortion : FB RX TdDRC, FdEQ
=> Volume curve : FB SPK_VOL
5. HE TTY VCO: sync the latest of HH TX
6. HE TTY HCO: sync the latest of HH RX
7. HE Headphone : sync the latest of HH TX
8 HAC TX: sync the latest of HA TX
9. HE blackbird: Modify TX operation mode, low-delay and Handfree
10. HE Condor: Modify TX operation mode, low-delay and Handfree
11. HE Condor-Certification1: Modify TX operation mode, low-delay and Handfree
//R4
1. HA NB/WB/SWB/FB : Mic blocked paramter temp disable
2. HH NB/WB/SWB/FB: Mic blocked parameter temp disable
3. HE TTY VCO: sync the latest of HH TX
4. HE Headphone : sync the latest of HH TX
5. HAC TX: sync the latest of HA TX
6. HE blackbird: Modify TX operation mode, low-delay and Handfree
7. HE Condor: Modify TX operation mode, low-delay and Handfree
8. HE Condor-Certification1: Modify TX operation mode, low-delay and Handfree
Bug: 174635995
Test: manual test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I55824022f4e15c9f62b8624d390febf1195499da
Add prorperty so thermal-hal can sent powerhint.
Bug: 188579571
Test: thermal-hal can sent powerhint.
Change-Id: Ia38d7c56638d4ed88eedde1ed94ad8ac1e64e351
Signed-off-by: David Chao <davidchao@google.com>
O6:
+ improves loudness
+ improves clarity
+ incorporates landscape tuning with good left-right balance
Tuning work will continue to improve transient performance at max volume,
and incorporate feedback from UTD and PAE tests.
Bug:17908976
Test: playback/mute on,off/bypass/lr swap, mixed
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib038235997abe417449dc9db96fe42a2700307fc
Bug: 187912470
Test: make -j128
Test: deep buffer and compress offload via speaker, USB headset, BT
earphone
Test: phone call via handset
Test: hotword detection
Change-Id: I80ec553797ff7955de0464b98046f879424d0fc5
1) Update VIRTUAL-QI-GNSS formula for Oriole
2) Lower shotdown threshold by 1C for Oriole
3) Disable charging at SEVERE for Oriole & Raven
Bug: 189888812
Bug: 190201749
Test: Boot
Change-Id: Iffc42a6f90935a8f1361bc04aeb08743b839aadc
O6:
+ improves loudness
+ improves clarity
+ incorporates landscape tuning with good left-right balance
Tuning work will continue to improve transient performance at max volume,
and incorporate feedback from UTD and PAE tests.
R4:
+ Improves loudness
+ Improves clarity and reduces bass distortion
+ Incorporates a landscape tuning that balances left and right speakers.
Further tuning work will improve bass response at lower volume steps and
improve tonal balance to reduce sibilance. We will also incorporate
feedback from UTD and PAE subjective studies.
Bug: 179089856
Bug: 179089765
Test: playback / mute on,off/bypass/lr switch, mixed
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I85599edfd87c4c96f1486ea68f49006bf5a871fb
Need to add a new control "USB Config To AoC" in mixer table
Bug: 190002718
Test: verify it with a new mixer table, and it works on O6
Change-Id: Ibcb43d50d0185d8b5249aa2a5620c69871b97de5
Bug: 188365095
Test: Confirm throttling based on criteria matched
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I417ced61da6fe2bf44927878676bee877789fd23
Bug: 179534284
Test: Manual verify speaker basic function work
Change-Id: Iaef4940f8c7500ff56dccf5de26ac29a2a875260
Signed-off-by: Robert Lee <lerobert@google.com>
Add ro.gms.dck.eligible_wcc system property to
P21 devices.
Usage of ro.gms.dck.eligible_wcc is as follows:
1: NFC only
2: NFC and Bluetooth LE (NFC + RKE Functions)
3: NFC, Bluetooth LE, and UWB (NFC + RKE Functions + Passive/Location-based
Functions)
Bug: 186488185
Test: Build and flash on R4.
Confirm GMSCore can access the properties.
Signed-off-by: Michael Ayoubi <mayoubi@google.com>
Change-Id: I6641270ede1ac49b517775ce3444306c50bcd78a
Set night/low as 2 nits, sun/high as 50 nits
Bug: 184728677
Test: Boot test and check AOD brightness
Change-Id: I0e6f5fda297f3e57f21a1d45e2f70b0dcccf04d1
Added SPDX-license-identifier-Apache-2.0 to:
self-extractors_oriole/google_devices/staging/Android.mk
Bug: 68860345
Bug: 151177513
Bug: 151953481
Test: m all
Exempt-From-Owner-Approval: janitorial work
Change-Id: If3a7caf60368f498c08b7950353aa86ae75bc2f9
Test: Test: local build test. If use highspeed usb + capture. AOC crash. otherwise, everything is normal
Bug: 182996456
Change-Id: I48958acf8dfc77fa90096fc72cd6912c460e1db2
This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.
And also enable timesync for raven.
Bug: 172616898
Test: ccc_test
Change-Id: Id3663f058415cc3f5b50d88b7c70844a53bc9f0f
This CL transitions the regular build to the AIDL fingerprint HAL, while
keeping the factory build on HIDL.
AuthService reports "Registering HIDL ID: 0 Modality: 2 Strength: 15"
only for the factory build.
Bug: 188193467
Test: build raven-userdebug
Test: build factory_raven-userdebug
Test: adb logcat | grep AuthService
Change-Id: I3d02e560e5e624aa85f1c3d14d52d7bb5070ee4d
This CL transitions the regular build to the AIDL fingerprint HAL, while
keeping the factory build on HIDL.
AuthService reports "Registering HIDL ID: 0 Modality: 2 Strength: 15"
only for the factory build.
Bug: 188193467
Test: build oriole-userdebug
Test: build factory_oriole-userdebug
Test: adb logcat | grep AuthService
Change-Id: I2c10239b93f9c8025607643385304b16f24f5dc6
