Enable cellular mitigation on critical battery condition.
Bug: 181572536
Test: Local Test
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I310c3b67bc6a7f83a724005665eeda50b29469f7
Change list:
update the parameters on each module on Camcorder(enable module: IIR1,
linear gain, Surround, IIR2, AGC, MBDRC)
Bug: 181869495
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I9afc4cf202f65138d78040421a10148e2b5097b7
Turn on "LVM Enable" when the offload playback path is applied.
Bug: 180984363
Bug: 165719427
Test: make -j128
Test: test LVM effects and visualizer on offload playback on oriole
Change-Id: I5e64575ce39fe0e8d9f54913ccab9cc47da8763e
1. HA TX/RX FB tuning - TdDRC/FdEQ/PreEQ/PGA, and sync to HAC-TX
2. HH TX/RX FB tuning - TdDRC/FdEQ/PreEQ/PGA
3. HE no mic heaset NB/WB/SWB/FB - sync HH TX
4. TTY HCO/VCO NB/WB/SWB/FB - sync HH RX/TX
5. BT
- BT HAC TX NB/WB/SWB/FB- sync HH TX
- Downlink
* Set RX PGA Gain to be 0.
For all bandwidth NB, WB, SWB and FB.
For all BT scenarios: BTNB-NREC-off, BTNB-NREC-on, BTWB-NREC-off, BTWB-NREC-On, BT-HAC.
* Merge RX BT setting to BT-HAC for NB, WB, SWB and FB.
* Set volume to be 0dB for all volume step. For all bandwidth NB, WB, SWB and FB.
For all BT scenarios: BTNB-NREC-off, BTNB-NREC-on, BTWB-NREC-off, BTWB-NREC-On, BT-HAC.
Bug: 174635995
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I0b9fd9e8421577c1bb07913e2740c60ed5a51b05
- improving the tonal balance in the treble region
Bug:179089765 #comment13
Test: mute on/off, L/R mixed, L/R swap
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ife791670350dbfddceb420d583c487dc6ce72a68
major changes:
1. Include and build LUT binary
prebuilt files.
Bug: 182729023
Test: Forrest build and run CTS tests.
Change-Id: Ifaac732f241ab42651521fa59f9c5b94aac097cc
Request From HW Darren and only modify on o6/r4
Test: verify by HW Darren
Bug: 182761985
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Change-Id: I5461ed54078dce1a532b345a923530fa00ddd97f
This config_screenBrightnessNits/config_screenBrightnessBacklight are not used
when we have the displaydeviceconfig (ddc) exist in screenBrightnessMap.
Bug: 177140883
test: check brightness table
Change-Id: I7855602652a39288965e7510084d98d4d040312d
Bug: 173330899
Test: twoshay is launched
Signed-off-by: Steve Pfetsch <spfetsch@google.com>
Change-Id: I189f32e0fcb6b5880bc188971cc847603aafa4dc
Signed-off-by: Tai Kuo <taikuo@google.com>
Revert submission 13885469-whi-common-folder-post
Reason for revert: Those are not redundant. They are needed for AOSP builds.
Reverted Changes:
I43557b667:raviole: remove redundant includes
I7a5981fae:blueport: remove redundant includes
Change-Id: I21c98ac4876c8cbab96b9d8af5967103cf6eb9ee
Use a persist system property to control the touch driver attribute
file glove_mode.
0: default sensitivity mode (default)
1: high sensitivity mode
Bug: 173330977
Bug: 174189638
Test: manual test
Signed-off-by: Tai Kuo <taikuo@google.com>
Change-Id: Id5e31bd335f8872993ea82ad9a7e7217ed9de5c6
R4 and O6 supports high speed mode on logical(0) and main(2) camera currently.
Since P21 only exposes rear logical camera, keep the high speed mode exposed
only on rear logical camera too.
Bug: 181600286
Test: CTS no regression
android.hardware.cts.CameraTest#testImmediateZoom FAIL
android.hardware.camera2.cts.CaptureRequestTest#testZoomRatio FAIL
Tests Passed: 181, Failed: 2, Not found: 0, Status unknown: 0
Signed-off-by: Peter Liu <pingchienliu@google.com>
Change-Id: I2a20596a83e3eb0a8a26bbc596aac6b7c25ff950
We will have a 'vendor' project containing proprietary blobs
to be able to build and flash Pixel device when vendor source is not
available.
The project names are
platform/vendor/aosp/google_devices/raven
platform/vendor/aosp/google_devices/oriole
and the paths are
vendor/google_devices/raven
vendor/google_devices/oriole
BUG: 182332166
Change-Id: I947934c7f2d38c6fe504cfe8a4368d9b426e4b48
