Change list:
Update recording.gatf, templete file for modifying parameters to fit
the change of dynamic range compressor(DRC)(b/200794903), the DRC has
been changed from 1 band to 3 band.
Bug: 204745396
Test: build pass
Signed-off-by: vincenttew <vincenttew@google.com>
Change-Id: Ic0962536e50b310a159af15e7e191f130d41e969
(cherry picked from commit 4bfaa9f2f3)
Add Audio Capture Eraser Enable to switch
Eraser for recording path.
For gain of this path, we shouldn't apply
software gain, because the input source is
from hotword pipeline.
Test: build pass
Bug: 172266161
Change-Id: I2546e25c8ba428681fd778491cd66dca66051305
Change the CRITICAL setting of dc_icl in odpm-lo to 100mA.
Bug: 202368734
Test: Boot & verify the actions via logcat
Change-Id: Iec0850fe62ce841884ac9a2af9ee0aff77790223
Reason:
-Change the microphone assignment from rear mic to top mic since there is a risk that the rear mic will be blocked when users put devices on the desk.
Change list:
Update recording.gatf file for changing microphone assignment in handset_mono_mic usecase
Validation:
3rd party camcorder/recorder and GCA function are good and validation was used SD1A.210817.026 (7772856)
Bug: 202467646
Test: forrest build
Change-Id: I3b0f8a7ba590925fc70f28bdd3bbb4b29938fd68
1) Lower CRITICAL temperature of VIRTUAL-SKIN to 46.5
2) Update the virtual-sensor formula based on latest data
Bug: 201020972
Test: Boot
Change-Id: I5dd45635828932b4561ab1deafe10de66a924dcd
The ALARM volume curve on SPEAKER device must have a lowest
point with abscisse 0 instead of 1 to prevent the stream from
being muted when lowest UI index is selected.
Bug: 201069348
Test: set alarm volume to min and play alarm
Change-Id: I29dda66002562e9ce889bd4f8b0154c2837f7be5
Limit high brightness mode for HDR to 60Hz on both O6 and R4.
Bug: 196691596
Change-Id: I2bebff0b5c0677e83a55168332bb2271a073bae1
Merged-In: I2bebff0b5c0677e83a55168332bb2271a073bae1
This reverts commit 74188d76380e2227119659c2c0670490bb38e091.
Reason for revert: Breaks camera
It appears the new frequencies in these table are buggy hence breaking camera.
Bug: 201155685
Change-Id: Ib1b0fc7d865cd1e7ee8c0f5575a2211e4629f5a9
Reason:
- Optimize audio zoom quality in camcorder
- Add tuning parameters to fit single band DRC modification in AOC (b/198128358)
Change list:
Update recording.gatf file for modifing audio zoom tuning parameters
Update template.xml file to select single band DRC reference channel
Validation:
3rd party camcorder/recorder and GCA function are good and validation was used SD1A.210817.019.A7 (7719665)
Bug: 201031972
Test: forrest build
Change-Id: I45cf7dcb0edbd38d0041e3112d88ce29cefacb2f
Change the period size of VoIP Record to 20ms.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 196912510
Test: Build pass
Change-Id: I6434a7596880712efa7cbfa03b3480efb5e2c2aa
Update TPU SKIN thermal throttling to supports the full DVFS state table
to match TPU hardware DVFS capabilities.
Bug: 198679654
Test: Verified by emul temp
Change-Id: I8ddc588ad4fe48c9def78a180c5ff43b4a4203de
Add a new virtual sensor VIRTUAL-SKIN-CHARGE dedicated for charging
and lower the temperature threshold for thermal severity.
Bug: 195619668
Test: Boot
Change-Id: Ia8901e55d161a9d989a3d8450b62efe844900765
Moving forward, binned brightness will not
use prox. Let's get rid of this unnecessary config.
Test: manual
Bug: 194151347
Change-Id: I3352a3007138232c32aeb43ce4ec3ce97dad239d
Add a new virtual sensor VIRTUAL-SKIN-CHARGE dedicated for charging
and lower the temperature threshold for thermal severity.
Bug: 195619668
Test: Boot
Change-Id: I5e90762f2eb6e2ee55c78a23aec64102586f0143
Telephony downlink ASRC should be enabled for USB. See b/173577733.
Otherwise the downlink ring buffer will underflow or overflow
Bug: 199230403
Test: Local build + Telephony test for five minutes: No glitch observed.
Signed-off-by: Roger Fang <rogerfang@google.com>
Change-Id: Ifbcd9252c97a7f794e0b142e69faf1b0f3041098
