1) Adjust the position of punch hole to match the H/W display
2) Previously, there wasn't rounded corner drawable for raven,
R4 adapted with gs101 customization by default.
Test: make and flash ROM
Test: Observe rounded corner and punch hole
Bug: 179171408
Change-Id: Ib68797c870fb5ee1208c844a9863090856ad8ee7
Bug: 165776638
Test: VOIP / voice/ playback/ record
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I2133cedac1cf718e3632df5f292a2688fc009428
In AOC, ULL support requires the sink to be ULL
Speaker, Analog HP and USB are ULL Sinks,
Modem and BT are LL
Bug: 165737390
Test: OboeTester --> TEST OUTPUT
Change-Id: I23da02a52586e2f5d017142b5947dd082cdc2c62
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Update path name "voice-speaker" to choose VMON of bottom speaker AMP as EC reference under telephony HH mode.
2. Add the "boost peak current limit" control of cirrus speaker amps for initial value(3.50A) and below paths name.
- "speaker" for stereo speaker playback, top amp with 1.70A, bottom amp with 1.90A
- "speaker-safe" for mono speaker playback(ringtone, alarm, notification), bottom amp with 3.50A
- "voice-handset" for telephony HA mode, top amp with 3.50A
- "voice-speaker" for telephone HH mode, bottom amp with 3.50A
Bug: 174448901
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I8bb847fbf1fc8632edf7a4f27b22184a4dd828d4
AudioRecord not support PCM_FLOAT on FAST path yet.(b/77913243)
Use 16-bit format for low-latency-record.
Bug: 175673727
Test: OboeTester
Change-Id: I450d161cd1b236717ad01287b95f56a284443040
Move AEC and NS to the liboffloadeffect
Bug: 187153996
Test: make -j128
Test: run cts --include-filter "CtsMediaTestCases android.media.cts.AudioPreProcessingTest"
Change-Id: Ic4b7260b483b776ca917dc3694b7d66ba7eefde7
Temporarily remove haptics support so that Telecom fallback mechanism of
default vibration will play whenever audio coupled haptics is not
supported.
Bug: 186720581
Test: manually verify on raviole that default vibration plays for
ringtone
Change-Id: I77e4a4a7ff19e6665434d9318271d20cd64e6c1d
Signed-off-by: Vince Leung <leungv@google.com>
Change Raven front camera video recording to 60fps
Bug: 174339205
Test: go/slider-camera-test-checklist
Change-Id: Ieda8477b32754c0a9da7ff3c9cf59b11159cbad6
modprobe is smarter about locating .ko files if they are stored in
subdirectories. For example, it finds heatmap.ko regardless of whether
it's stored in /vendor/lib/modules/heatmap.ko or
/vendor/lib/modules/extra/heatmap.ko. modprobe also loads all
dependencies automatically. Let's migrate from insmod to modprobe.
Bug: 185184472
Change-Id: I439fdc76fb6211b416541256c92169da12b0100d
- O6
- Improves the loudness of O6 while maintaining tonal balance.
- Improve loudness and tonal balance of ringtones and notifications
on speaker-safe.
- R4
- Significantly increases the perceived loudness of the
speakers at maximum volume.
- Improves the tonal balance and is tuned for distortion
mitigation for 1.8A current limits.
- Improves the loudness and tonal balance of ringtones and
notifications on speaker-safe.
Bug: 179089765
Bug: 179089856
Test: playback, mute on/off, bypass, lr swap/mixed
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I6bc5abfcb2d393c51946524861119629f158cbe2
To make thermisters rf1_therm and rf2_therm visible to thermal hal they
are needed to be added to the thermal_info_config
Bug: 171092743
Test: On Device
Change-Id: I6ae8933afed7cfbd9b90290eddb7b84aaa7612de
The patch turns on smooth display in Settings App by default to allow
more users experience 120Hz. Users can still disable the feature in
Settings App.
Bug: 185102566
Test: Basic panel flickering and performance tests by UTD
Change-Id: I67420f5625294873095c624d75ee7914bbe22035
For Cirrus amp, ASP means Audio Serial Port.
For AoC, ASP means Audio Signal Processing.
Bug: 184238845
Test: manual test factory test command
Change-Id: I8d62535056ef680e14ccc708c8f722a3dfab12ab
Signed-off-by: Robert Lee <lerobert@google.com>
Increase period size to avoid using Fastmixer in the deep buffer
playback.
Bug: 185096280
Test: manual audio tests
Signed-off-by: juyuchen <juyuchen@google.com>
Change-Id: I8ce12f151eaa9b711e1dacaf12e2f70c0555bf30
This reverts commit 7357dbcb59.
Reason for revert: Fixed uwb service crash
Test: flash on raven, verify uwb service is idle, unplug usb
Change-Id: I2f3a3a73d16e8a282fdbb171bf60ad2cafa0d7c5
//R4O6
1. HA NB/WB/SWB/FB : adjust Mic SRC assignment / RX& TX Response adjust
2. HH NB/WB/SWB: TX/RX distortion fine tuning, WB TX PGA gain -> 0x1000
3. HE TTY HCO: sync the latest of HH RX
4. HE TTY VCO: sync the latest of HH TX
5. HE Headphone: sync the latest of HH TX
Bug: 174635995
Test: phone call
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ie384611a64bf6f837909f586fa4003345e4d292c
Enables default setting to 90hz mode, this can be disabled through
Settings app.
Bug: 179149537
Test: wipe user settings and check default peak refresh rate enabled
Change-Id: I5c5bd2f72c7a348f802a631b14cad45ca81462a9
Bug: 179534284
Test: Manual verify speaker basic function work
Change-Id: I8f1dc408717042e8e8a6d1e30cca2548a45ee337
Signed-off-by: Robert Lee <lerobert@google.com>
Bug: 174189880
Test: twoshay is launched
Signed-off-by: Steve Pfetsch <spfetsch@google.com>
Change-Id: I9c4b2c760d4b004944728a3ebdeb4c0da937c10f
Signed-off-by: Tai Kuo <taikuo@google.com>
Disable wireless charging during drain, usb charging,
and charger stress test
- vendor.disable.wlc 1
If device put onto dreamliner and shutdwon(drain out),
it would boot up by DC_CHG and keep shutdown(0%)-boot up
(by DC_CHG) continously. To avoid this symptom, limit wireless
current_max as 75000 after device boot up
- persist.vendor.limit.wlc.current=1
How to verify:
adb shell setprop vendor.disable.wlc 1
adb shell cat /sys/class/power_supply/wireless/online >>>> 0
adb shell setprop persist.vendor.limit.wlc.current 1
adb shell cat /sys/class/power_supply/dc/current_max >>>> 75000
Bug: 179094447
Test: set the property manually and query the result from file node.
Change-Id: Ic5791c53f735caa19c73bae750651d774c0d4615
Signed-off-by: Ken Tsou <kentsou@google.com>
(synced from commit 84d73dafb7e44bd195adcc4cbb16bad28728aedc)
Change list(R4/O6):
1. Update the parameters in each module(IIR_1, SUR, IIR_2, AGC, MBDRC)
2. Aim for different scenario(based on the rotation the the DUT) provide
different tuning parameters
3. Fine-tuning the zoom gain of AZ
Bug: 181869495
Test: camcorder
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I1d0aa78f657fcfc20bf5a570bbbebb28f4896bba
In media_profiles_raven.xml, there is non-whitespace character, So
remove it.
Bug: 184726685
test: atest vts_mediaProfiles_validate_test with media_profiles_raven.xml
Change-Id: I1d8c257880c296ed0c5f1f3d4a93aafd84109be7
