Change the period size to 20 for audio record.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 190453606
Bug: 189793417
Test: Test av sync for camera recording
Test: Test av sync for video playback
Change-Id: Ic7225979a411f6fdef1e5869df7f816bd49003b1
<Change List>
For audio_platform_configuration.xml to both O6 & R4,
1. Add below devices for input_backend_cfg_mic_mapping to fix b/188696633.
- <backend_cfg in_cfg="IN_CAMCORDER_INVERT_LANDSCAPE_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_PORTRAIT_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_SELFIE_LANDSCAPE_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_SELFIE_INVERT_LANDSCAPE_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_SELFIE_PORTRAIT_BE_CFG">
- <backend_cfg in_cfg="IN_VOICE_RECOGN_MIC_BE_CFG">
- <backend_cfg in_cfg="IN_UNPROCESSED_MIC_BE_CFG">
- <backend_cfg in_cfg="IN_UNPROCESSED_DUAL_MIC_BE_CFG">
- <backend_cfg in_cfg="IN_UNPROCESSED_TRIPLE_MIC_BE_CFG">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Fix freeze issue when running Diagnostic Tool for microphone test.
2. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
3. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
4. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: Builds pass and verified by hardware
Change-Id: Ifb14911eb25ef2b0f42d29b609ae6f9b74ddaa44
Signed-off-by: Robert Lee <lerobert@google.com>
1. Reduce the polling time to 60s to reduce the lantancy when ThermalHAL
miss the trigger sensor's notification.
2. Adjust the trigger sensor's threshold to lower temperature.
Bug: 191971470
Bug: 191795038
Test: adb shell lshal debug android.hardware.thermal@2.0::IThermal/default
Change-Id: I2559944dfdef684ee93867a15dea257ee5f435b9
This reduces the brightening and darkening light debounce
configuration to match R3 and earlier Pixel devices.
Bug: 185770517
Test: Verified "dumpsys display" shows correct config values.
Verified brightness transitions are similar to R3 now.
Change-Id: I6bd47cb52c28c63ece6b5247344a6cf062eb31ea
1. Update charging throttling policy according to the new kernel change
2. Adjust the virtual sensor formula for 5G cases.
Bug: 182970733
Bug: 183559513
Bug: 190449889
Bug: 190450703
Test: Verified by emul temp
adb shell lshal debug android.hardware.thermal@2.0::IThermal/default
Change-Id: Ieb859c93cdfa7486ad199af21b57db0732c24006
Update the Default brightenss to 0.17429718 for mapping to 140 nits
Bug: 187917731
Test: Dump the display log and check mScreenBrightness
Change-Id: I9836a2dd0127c881b0eceb4d2c908bb52ea709e7
For raven, set the set vendor.powerhal.adpf.rate to 8.3ms
For oriole, set the set vendor.powerhal.adpf.rate to 11.1ms
Bug: 177493042
Test: build
Change-Id: I1f535105f66d6bf34025f3c11d94c83d69c730da
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Add default value for "MIC Record Soft Gain (dB)" control to accommodate with b/189498328.
2. Update below path name to move compensation gain from "MIC HW Gain At High Power Mode (cB)" to "MIC Record Soft Gain (dB)" to fix recording concurrency issue(b/189294476).
- <path name="handset-mic">
- <path name="speaker-mic">
- <path name="camcorder-mic">
- <path name="voice-recog-mic">
- <path name="unprocessed-mic">
- <path name="unprocessed-dual-mic">
- <path name="unprocessed-triple-mic">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
2. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
3. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: basic record pass
Change-Id: I3f7759e6998f419a3d7d87b032d8088f5bc7dac0
Previously, we defined a list of kernel modules that should be
excluded from the vendor_boot image. (Those modules are loaded
from the vendor_dlkm partition during second stage init.)
Going forward, we import a list distributed by the kernel build that
explicitly defines the kernel modules to included in the vendor_boot
image.
Bug: 190652328
Change-Id: I8d67bfdaa121ddd82dc9e493c9b18cebdc05233c
