Adjust to smooth the curve for gfxbench improvement
Bug: 178178393
Test: run gfxbench safety certification
Change-Id: Idb3c7f77aa4e60ba914fa6abd25e2ccd0758507a
1) Adjust dc_icl settings due to one more level 100000 in dts
2) Change fcc ODPM-lo at MODERATE from 0 back to 1
3) Adjust wlc_fcc settings due to one more level in dts
Bug: 193785535
Test: Boot
Change-Id: If8b6a1439d4464968589f1ed8f6234fac6991977
Adjust the latency for OUT_USB_HEADSET_BE_CFG
Bug: 174992590
Test: Test av sync for video playback
Change-Id: Idc1dedbbc21290106d417905832810b1ebd1c576
Change CdevFloorWithPowerLink for fcc at MODERATE from 1 to 0 to avoid
unwanted throttling from fcc when wlc_fcc is set to 0 with ODPM-lo.
Bug: 192281595
Test: Boot & check log
Change-Id: I718eeb1c3c325a34345a24de90669f349addc972
O6:
1. significantly reduces distortion artefacts at high volumes
2. introduces bass management to balance low frequency response
across the volume curve
3. improved tonal balance at nominal volumes
4. improved landscape stereo image across the volume curve
R4:
1. This tuning improves the stereo balance between left and right
in landscape orientation, and removes the pop artefact when
rotating between portrait and landscape.
Bug: 179089856
Bug: 179089765
Test: playback, mute on/off, bypass on/off, lr swap/mixed
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I732742524ddbdd787ae86520141fb464ab01ca5a
Update power link settings for o6 proto to resolve thermalhal crash.
Bug: 193373779
Test: use emul_temp to check cpu throttling work
Change-Id: Iff6b16458c717c6a8aba0b82ecb7f78535ffe5e8
Apply the entry point of raw path which writes data through
pcm mmap from user space to DRAM ring buffer.
Bug: 190775545
Test: OboeTester
Change-Id: I3f61126f323fcebc0a2b53c06d564b9e9e64f823
PPVAR_VSYS_PWR_DISP only exists for those devices before evt1.0. Remove
them to avoid thermalhal crash.
Bug: 193373779
Test: boot
Change-Id: I2c6ba85e9d80d851bfa45430d65fd3361e655e53
Let USB HiFi BE as a standalone bind/src command to AoC.
And fix that USB HiFi Rx no audio after the other touch
sound's UC and BE is closed.
On top of the change of pa/1959717
(pa/Ib82ff06986ebe97d472f4518aa136f32da30da66)
Test: Local test
Bug: 191222376
Change-Id: I1017aab232bd2e929dc4caa9939f0613ba937f86
//R4
1. HH FB EPD offset set to 0x0000
2. HH SWB TX fine tuning (FdEQ only)
3. HA TMUS settings NB/WB/SWB (RX+TX)
4. mute time from 200ms -> 10ms (all modes)
5. HA BVE NB/WB (Generic)
6. HA NB/WB/SWB/FB FFP on
7. HE TTY VCO: sync the latest of HH TX
8. HE TTY HCO: sync the latest of HH RX
9. HE Headphone : sync the latest of HH TX
10. BT HAC : sync the latest of HH TX
11. HA NB/WB/FB BVE off
12 Headset-USB_Blackbrid-Voice_Generic
- FB TX EQ
- FB RX EQ
13. Set //RX_FENS_RESRV_0 to be 0x000A for all scenarios on Bluetooth and Headset
//O6
1. HH FB EPD offset set to 0x0000
2. HH EVT1.1 Tuning
=> Mic design change: PreEQ NB/WB/SWB , FdEQ SWB
=> RX FR fine tuning: FdEQ NB/WB/SWB
=> Volume curve fine tuning : SPK_VOL WB (vol3 only)
3. HA EVT 1.1 Tuning
=> NB/WB/SWB/FB (Pre-EQ / TX_FDEQ / RX_TDDRC / VOL / RX_FDEQ)
4. mute time from 200ms -> 10ms (all modes)
5. HA BVE NB/WB (Generic)
6. HA NB/WB/SWB/FB FFP on
7. HE TTY VCO: sync the latest of HH TX
8. HE TTY HCO: sync the latest of HH RX
9. HE Headphone : sync the latest of HH TX
10. BT HAC : sync the latest of HH TX
11. HA NB/WB/FB BVE off
12 Headset-USB_Blackbrid-Voice_Generic
- FB TX EQ
- FB RX EQ
13. Set //RX_FENS_RESRV_0 to be 0x000A for all scenarios on Bluetooth and Headset
Bug: 174635995
Test: manual test by acoustic team
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ic76c1c9c7e9255565f5ee75e92f604723fd4c943
1. Update raven virtual sensor formula
2. Add power link settings for charging throttling reference
3. Support cdev_ceiling and cdev_weight for each severity
Bug: 192281595
Bug: 182970733
Bug: 183559513
Bug: 190809187
Bug: 184582287
Test: verified by emul temp
Change-Id: I4d51f60cb970e0f9d82273243cbd3aed16f8997b
This config indicate whether to allow the device to suspend
when the screen is off due to the proximity sensor. This
resource should only be set to true if the sensor HAL correctly
handles the proximity sensor as a wake-up source. Otherwise,
the device may fail to wake out of suspend reliably.
Bug: 192324731
Test: 1. Unplug USB. 2. make a phone call.
Test: 3. Cover p-sensor, the screen turns off for 10 seconds
Test: 4. Uncover p-sensor. 5. Plug USB.
Test: 6. 'adb shell dmesg | grep suspend' to check if AP ever suspend in calls.
Change-Id: I90c0ef56211908b5a211d9f887bbfc6693a3be40
