Change the CRITICAL setting of dc_icl in odpm-lo to 100mA.
Bug: 202368734
Test: Boot & verify the actions via logcat
Change-Id: Iec0850fe62ce841884ac9a2af9ee0aff77790223
Reason:
-Change the microphone assignment from rear mic to top mic since there is a risk that the rear mic will be blocked when users put devices on the desk.
Change list:
Update recording.gatf file for changing microphone assignment in handset_mono_mic usecase
Validation:
3rd party camcorder/recorder and GCA function are good and validation was used SD1A.210817.026 (7772856)
Bug: 202467646
Test: forrest build
Change-Id: I3b0f8a7ba590925fc70f28bdd3bbb4b29938fd68
1) Lower CRITICAL temperature of VIRTUAL-SKIN to 46.5
2) Update the virtual-sensor formula based on latest data
Bug: 201020972
Test: Boot
Change-Id: I5dd45635828932b4561ab1deafe10de66a924dcd
The ALARM volume curve on SPEAKER device must have a lowest
point with abscisse 0 instead of 1 to prevent the stream from
being muted when lowest UI index is selected.
Bug: 201069348
Test: set alarm volume to min and play alarm
Change-Id: I29dda66002562e9ce889bd4f8b0154c2837f7be5
Limit high brightness mode for HDR to 60Hz on both O6 and R4.
Bug: 196691596
Change-Id: I2bebff0b5c0677e83a55168332bb2271a073bae1
Merged-In: I2bebff0b5c0677e83a55168332bb2271a073bae1
This reverts commit 74188d76380e2227119659c2c0670490bb38e091.
Reason for revert: Breaks camera
It appears the new frequencies in these table are buggy hence breaking camera.
Bug: 201155685
Change-Id: Ib1b0fc7d865cd1e7ee8c0f5575a2211e4629f5a9
Reason:
- Optimize audio zoom quality in camcorder
- Add tuning parameters to fit single band DRC modification in AOC (b/198128358)
Change list:
Update recording.gatf file for modifing audio zoom tuning parameters
Update template.xml file to select single band DRC reference channel
Validation:
3rd party camcorder/recorder and GCA function are good and validation was used SD1A.210817.019.A7 (7719665)
Bug: 201031972
Test: forrest build
Change-Id: I45cf7dcb0edbd38d0041e3112d88ce29cefacb2f
Change the period size of VoIP Record to 20ms.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 196912510
Test: Build pass
Change-Id: I6434a7596880712efa7cbfa03b3480efb5e2c2aa
Update TPU SKIN thermal throttling to supports the full DVFS state table
to match TPU hardware DVFS capabilities.
Bug: 198679654
Test: Verified by emul temp
Change-Id: I8ddc588ad4fe48c9def78a180c5ff43b4a4203de
Add a new virtual sensor VIRTUAL-SKIN-CHARGE dedicated for charging
and lower the temperature threshold for thermal severity.
Bug: 195619668
Test: Boot
Change-Id: Ia8901e55d161a9d989a3d8450b62efe844900765
Moving forward, binned brightness will not
use prox. Let's get rid of this unnecessary config.
Test: manual
Bug: 194151347
Change-Id: I3352a3007138232c32aeb43ce4ec3ce97dad239d
Add a new virtual sensor VIRTUAL-SKIN-CHARGE dedicated for charging
and lower the temperature threshold for thermal severity.
Bug: 195619668
Test: Boot
Change-Id: I5e90762f2eb6e2ee55c78a23aec64102586f0143
Telephony downlink ASRC should be enabled for USB. See b/173577733.
Otherwise the downlink ring buffer will underflow or overflow
Bug: 199230403
Test: Local build + Telephony test for five minutes: No glitch observed.
Signed-off-by: Roger Fang <rogerfang@google.com>
Change-Id: Ifbcd9252c97a7f794e0b142e69faf1b0f3041098
- changes volume 1,2,3,4,5 (due to a sound quality noise floor issue)
Bug: 198224217
Test: manual power test (b/198224217#comment21)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ied7e88ad941e8a13e2080da6e2897b9541966dd0
R4O6
Update camcorder tunings files for FRC
Reason:
- The SA-lite pipeline is used for 3rd party camcorder/recorder and
need to be updated tuning for audio quality (b/185293492)
- There is e-Noise issue could be noticed when using 3rd party
camcorder/recorder
Change list:
Update audio_platform_configuration.xml file so that parameters in
SA-lite pipeline can be loaded correctly
Update template.xml file to enable feature swapping microphone
assessment in SA-lite pipeline
Update recording.gatf file for modifing tuning parameters
Validation:
3rd party camcorder/recorder function are good and validation was
used SD1A.210817.007 (7665414)
Bug: 197492283
Test: forrest build passed
Change-Id: Ifc66519c92935dc4bd14d68a85a491f96429272a
///R4
1. HHNB/WB/SWB double talk fine tune with v5.3.11 lib fix
2. Headset TTY VCO: sync the latest of HH TX
3. Headset Headphone : sync the latest of HH TX
4. BT HAC : sync the latest of HH TX
5. Headset FB tuning for NS
///O6
1. HHNB/WB/SWB double talk fine tune with v5.3.11 lib fix
2. Headset TTY VCO: sync the latest of HH TX
3. Headset Headphone : sync the latest of HH TX
4. BT HAC : sync the latest of HH TX
5. Headset FB tuning for NS
Bug: 197716271
Test: manual test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I6376ce7da579dcda09c6077182cd82c6fb2c2efb
Release Notes (R4):
- Retune top volumes for more balanced sound, less harsh
- Heavy emphasis on vocals, both depth and clarity
- DTMF volume curve reduced to better align w/ O6, F2, C2, B9
- SYSTEM volume curve reduced to better align touch sounds
- SYSTEM volume curve copied into AUDIBLE volume curve
Release notes (O6):
- Camera shutter (system sound) decreased volume curve to better align w/ R4/B9 and F2/C2
- Slight adjustment at min vol point for DTMF
- SYSTEM volume curve reduced to mitigate loud camera shutter
- SYSTEM volume curve copied into AUDIBLE volume curve
Bug:190960105
Test: High level tuning validation (b/190960105#comment15)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Icf0c9e921017b5e06ec950452a78a9d89acf86f2
