We found that CPU-MID loop will cause big bouncing (~2 degC) during
light loading test (burncycle with dutycycle), we can avoid such
bouncing by remove stop CPU-MID loop at 39.
Apply same change on CPU-HIGH to avoid similar issue.
Bug: 286773651
Test: run burn8 / burncycle_wih_dutycycle / gb5
Change-Id: I11cfbb940a556793ce1fe6d08ff06fc1df55d52a
Signed-off-by: Peter (YM) <peterym@google.com>
- SB3 HE
Turn on FENS on Condor V21 WB
Files from the latest attachment on b/291188480
Bug: 291188480
Test: verified by genewang@
Change-Id: Ib7b23277c04d736b9d9435a1831ab6f5a58b5513
- HK3 HE
Turn on FENS on Condor V21 WB
Files from the latest attachment on b/291188539
Bug: 291188539
Test: verified by genewang@
Change-Id: Ia714954f58d32e3d6a95c88c28ada4d1c081e911
By setting sae_pmkid_in_assoc in wpa_supplicant.conf file,
the PMKID generated in SAE authentication will be sent to
driver in External auth status(NL80211_CMD_EXTERNAL_AUTH) message
to driver. This will help driver/firmware to fill the PMKID
in association request frame.
Bug: 290562226
Test: Manual - Confirmed that sae_pmkid_in_assoc=1 is set in
wpa_supplicant.conf file.
Test: Connect/Disconnect with AP configured in WPA3 security
Change-Id: Ied6a1bea868c732e11a0a341e832701c05dd2478
usb_pwr_therm will be impacted by MODEM, so add more rules to
avoid false positive
Bug: 286482405
Test: emul_temp
Change-Id: I98ba998857cb4b1f876d51129becdb27d4356fd6
Also set config_regulatory_info_overlay_package_name, so the regulatory
labels are directly loaded from overlay package.
Bug: 283170651
Test: manual - check regulatory labels
Change-Id: I8005c86c1d093451a8f84c84a189b03130d840f3
The BTS window partial temperature is synthesized via component sensors.
The equation has been updated to reflect larger RCAM bezel present on
DVT units and beyond. The sensor HAL applies the final component to
create the BTS window temperature. This also fixes a bug where
previously the Offset value was off by a factor of 10, resulting in a 1
degree overestimate.
Test: sensor_test confirms reasonable window temp w/ sensor HAL update
Bug: 280076251
Change-Id: I659adbfeccfaf2832c740fd2ab14884948b3ed49
- HK3 Handset.dat (Owen)
1. Modify WB Rx FDEQ(v0615), SPK_Vol, and DRC Gain(10dB) for POLQA-MOS/VolCurve in Handset | T-MOBILE-US
2. Enable WB CNG in Handset | Voice_Generic/T-MOBILE-US and Handset_HAC | Voice_Generic/T-MOBILE-US
3. Modify SWB Rx FDEQ(v0628) and SPK_Vol for POLQA-MOS/VolCurve in Handset | T-MOBILE-US
4. Modify WB Rx FDEQ(v0628), SPK_Vol, and DRC Gain(9.3dB) for POLQA-MOS/Orange FR in Handset | Voice_Generic
5. Modify SWB Rx MaxVol,Max-1,Max-2 FDEQ(v0628) for Orange FR in Handset | Voice_Generic
6. Turn off AMS for all Handset mode use case and merge AMS 2nd tuning parameter in Handset | Voice_Generic NB/WB/SWB
- HK3 Headset (Gene)
1. Enable FENS for HEADSET-GOOGLE_CONDOR_CERTIFICATION1-VOICE_GENERIC-NB
- HK3 Speaker (Ricky)
1. DVT fine-tuning - includes TX Pre-EQ, RFR, volume curve in all bands.
Files from the latest attachment on b/289337353
Bug: 289337353
Test: verified by rickycheng@
Change-Id: Ie05b7e414943bc338bbfb6c67c571b2969b81cd7
