Because original EDR max power limit was too high that BT chip whould
not achieve to, reduce power limit to fix power control issue.
Update US/CA Bluetooth SAR tables.
Test: RF team test with BT firmware v0060.1036
Bug: 264631351
Change-Id: I5d71b167ed65b982b2a7707462de85380a26bba8
For better VSkin/Tskin correlation update the coefficients and offset
Bug: 267575487
Test: Local build and verify lshal
Change-Id: I401b37a8cba095d7f1452a0af0216b336df1e169
Reduced BLE power to 3.5dBm for US/CA due to FCC bandedge limit.
Boost EDR power by 2dB for EU/JP/WW to meet expected power.
Test: RF team test
Bug: 264631351
Change-Id: Id1004036108f5ff282f8c84c998915bc74f685ec
Dynamic recomposition in HWC is a feature to save some power savings
during idle case by flattening all layers using GPU composition.
Enable dynamic recomposition for display with index 0.
Bug: 267972056
Test: DR should be used when all layers have low fps
Test: DR should not be used when there's front buffer or video layer
Change-Id: I6ec0a05508524a7d15dddfc8e244a298e1fa5a6a
Change gain from 0 to 22
<path name="speaker-mic-post">
<ctl name="MIC Record Soft Gain (dB)" value="22"/>
Bug: 267236421
Test: verified by tuning team, b/267236421#comment5
Change-Id: I62bb4f61f690c7ea1649783ab6a00eb39a69aa03
Signed-off-by: Carter Hsu <carterhsu@google.com>
Bug: 265951418
Test: verified by emul_temp
Test: Run astress for 2 hr and no crash and false positive triggered
Change-Id: I7c3d0f63ecd614343a47cf60498b9472ae846faf
Transition speed set to 30s, high light range set to
130k-150k lux.
Bug: 255417189
Bug: 266436992
Test: builds
Change-Id: I68c6b63d6337ceab937c99292b49fe0254bf626e
Fix the bug where dragging ring volume slider all the way to left
would not trigger an icon change, on devices that do not have
a vibrator.
Solution: offer a boolean config for volumeDownToEnterSilent.
Bug: 265459313
Test: Manual. Slide ring volume to left in settings. Ring volume
icon should switch to mute/vibrate and not get stuck at normal.
Change-Id: I71621dc2655317de8fb16b7b57d6087dfe7ceff3
- Add disp_therm, neutral_therm as VSkin trigger sensors.
- Remove quiet_therm as trigger sensor.
Bug: 261149274
Test: Update local config and use emul_temp
Change-Id: I904af100ad5e684a24cfdeb3f600cf28ed2ccd78
Updating the Waves tuning to T6K6 REV25
(Google_T6K6_REV25_T6-v19_K6-v17_20230107_43-Madonna)
Bug: 263304645
Test: Build only
Change-Id: I6ad98e2159241573f9e99101b8efa201d0020eb1
New value is zero.
Bug: 241488207
Test: Manual. After the device is updated, verify that the notification
volume is zero when device boots up.
Change-Id: Iff1dd911cb702557e1171d53fa3432fbf691b4d9
