commit f16dd10ba342c429b1e36ada545fb36d4d1f0e63 upstream.
The write to RP2_GLOBAL_CMD followed by an immediate read of
RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write,
however by then the device is already in reset and cannot respond to a
memory cycle access.
On platforms such as the Raspberry Pi 4 and others using the
pcie-brcmstb.c driver, any memory access to a device that cannot respond
is met with a fatal system error, rather than being substituted with all
1s as is usually the case on PC platforms.
Swapping the delay and the read ensures that the device has finished
resetting before we attempt to read from it.
Fixes: 7d9f49afa4 ("serial: rp2: New driver for Comtrol RocketPort 2 cards")
Cc: stable <stable@kernel.org>
Suggested-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 279994e23d7e6d2a30f2cc7b7437fedccac0834d)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
commit 6eabce6608d6f3440f4c03aa3d3ef50a47a3d193 upstream.
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Rule: add
Link: https://lore.kernel.org/stable/1721148848-9784-1-git-send-email-george.kennedy%40oracle.com
Link: https://lore.kernel.org/r/1721219078-3209-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
[ Upstream commit 8492bd91aa055907c67ef04f2b56f6dadd1f44bf ]
When using a high speed clock with a low baud rate, the 4x prescaler is
automatically selected if required. In that case, sc16is7xx_set_baud()
properly configures the chip registers, but returns an incorrect baud
rate by not taking into account the prescaler value. This incorrect baud
rate is then fed to uart_update_timeout().
For example, with an input clock of 80MHz, and a selected baud rate of 50,
sc16is7xx_set_baud() will return 200 instead of 50.
Fix this by first changing the prescaler variable to hold the selected
prescaler value instead of the MCR bitfield. Then properly take into
account the selected prescaler value in the return value computation.
Also add better documentation about the divisor value computation.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240430200431.4102923-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 2b14e818ef3e49741ee60a317554222c6af3a800)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
[ Upstream commit 712a1fcb38dc7cac6da63ee79a88708fbf9c45ec ]
The removal of the last MAX3100 device triggers the removal of
the driver. However, code doesn't update the respective global
variable and after insmod — rmmod — insmod cycle the kernel
oopses:
max3100 spi-PRP0001:01: max3100_probe: adding port 0
BUG: kernel NULL pointer dereference, address: 0000000000000408
...
RIP: 0010:serial_core_register_port+0xa0/0x840
...
max3100_probe+0x1b6/0x280 [max3100]
spi_probe+0x8d/0xb0
Update the actual state so next time UART driver will be registered
again.
Hugo also noticed, that the error path in the probe also affected
by having the variable set, and not cleared. Instead of clearing it
move the assignment after the successfull uart_register_driver() call.
Fixes: 7831d56b0a ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240402195306.269276-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 21a61a7fbcfdd3493cede43ebc7c4dfae2147a8b)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
[ Upstream commit 77ab53371a2066fdf9b895246505f5ef5a4b5d47 ]
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100]
Fixes: 7831d56b0a ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 44b38924135d2093e2ec1812969464845dd66dc9)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
commit 47388e807f85948eefc403a8a5fdc5b406a65d5a upstream.
Assuming the following:
- side A configures the n_gsm in basic option mode
- side B sends the header of a basic option mode frame with data length 1
- side A switches to advanced option mode
- side B sends 2 data bytes which exceeds gsm->len
Reason: gsm->len is not used in advanced option mode.
- side A switches to basic option mode
- side B keeps sending until gsm0_receive() writes past gsm->buf
Reason: Neither gsm->state nor gsm->len have been reset after
reconfiguration.
Fix this by changing gsm->count to gsm->len comparison from equal to less
than. Also add upper limit checks against the constant MAX_MRU in
gsm0_receive() and gsm1_receive() to harden against memory corruption of
gsm->len and gsm->mru.
All other checks remain as we still need to limit the data according to the
user configuration and actual payload size.
Reported-by: j51569436@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218708
Tested-by: j51569436@gmail.com
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20240424054842.7741-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 9513d4148950b05bc99fa7314dc883cc0e1605e5)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
[ Upstream commit 54c4ec5f8c471b7c1137a1f769648549c423c026 ]
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...)
Cc: stable@vger.kernel.org
Fixes: 4d90bb147e ("serial: core: Document and assert lock requirements for irq helpers")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 56434e295bd446142025913bfdf1587f5e1970ad)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
commit 39cdb68c64d84e71a4a717000b6e5de208ee60cc upstream.
A memory overlapping copy occurs when deleting a long line. This memory
overlapping copy can cause data corruption when scr_memcpyw is optimized
to memcpy because memcpy does not ensure its behavior if the destination
buffer overlaps with the source buffer. The line buffer is not always
broken, because the memcpy utilizes the hardware acceleration, whose
result is not deterministic.
Fix this problem by using replacing the scr_memcpyw with scr_memmovew.
Fixes: 81732c3b2f ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Signed-off-by: Yangxi Xiang <xyangxi5@gmail.com>
Link: https://lore.kernel.org/r/20220628093322.5688-1-xyangxi5@gmail.com
[ KN: vc_state is not a separate structure in LTS v4.19, v5.4. Adjusted the patch
accordingly by using vc_x instead of state.x for backport. ]
Signed-off-by: Kuntal Nayak <kuntal.nayak@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit c8686c014b5e872ba7e334f33ca553f14446fc29)
[Vegard: fix conflict due to missing commit
d8ae7242718738ee1bf9bfdd632d2a4b150fdd26 ("vt: preserve unicode values
corresponding to screen characters").]
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
commit 74cb7e0355fae9641f825afa389d3fba3b617714 upstream.
If the remote uart device is not connected or not enabled after booting
up, the CTS line is high by default. At this time, if we enable the flow
control when opening the device(for example, using “stty -F /dev/ttyLP4
crtscts” command), there will be a pending idle preamble(first writing 0
and then writing 1 to UARTCTRL_TE will queue an idle preamble) that
cannot be sent out, resulting in the uart port fail to close(waiting for
TX empty), so the user space stty will have to wait for a long time or
forever.
This is an LPUART IP bug(idle preamble has higher priority than CTS),
here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE,
so that the idle preamble does not get stuck due to CTS is deasserted.
Fixes: 380c966c09 ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240305015706.1050769-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 206ef729592010631fd2fe721a94b4e71c61653e)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
[ Upstream commit 2861ed4d6e6d1a2c9de9bf5b0abd996c2dc673d0 ]
The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.
For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
port->membase = 0
port->mapbase = 0
port->iobase = 0
Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
/*
* If there isn't a port here, don't do anything further.
*/
if (!port->iobase && !port->mapbase && !port->membase)
return;
Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.
The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 5da6b1c079e6804a81e63ab8337224cbd2148c91 ]
Some derivates of sc16is7xx devices expose more than one tty device to
userspace. If multiple such devices exist in a system, userspace
currently has no clean way to infer which tty maps to which physical
line.
Set the .iobase value to the relative index within the device to allow
infering the order through sysfs.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20200901120329.4176302-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 2861ed4d6e6d ("serial: sc16is7xx: fix broken port 0 uart init")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 4e9679738a918d8a482ac6a2cb2bb871f094bb84 ]
Revert commit b4b844930f27 ("tty: serial: fsl_lpuart: drop earlycon entry
for i.MX8QXP"), because this breaks earlycon support on imx8qm/imx8qxp.
While it is true that for earlycon there is no difference between
i.MX8QXP and i.MX7ULP (for now at least), there are differences
regarding clocks and fixups for wakeup support. For that reason it was
deemed unacceptable to add the imx7ulp compatible to device tree in
order to get earlycon working again.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211124073109.805088-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e0edfdc15863 ("tty: serial: fsl_lpuart: add earlycon for imx8ulp platform")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ]
It seems a copy&paste mistake that suspend callback removes the GPIO
device. There is no counterpart of this action, means once suspended
there is no more GPIO device available untile full unbind-bind cycle
is performed. Remove suspicious GPIO device removal in suspend.
Fixes: d0aeaa83f0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 787e2620d1574196f10193a7c3693d95958254cb)
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ Upstream commit 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 ]
The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.
Extract from datasheet:
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
SC16IS752... In all other aspects, the SC16IS762 is functionally and
electrically the same as the SC16IS752.
The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.
For all variants, only SPI mode 0 is supported.
Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.
Fixes: 2c837a8a8f ("sc16is7xx: spi interface is added")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit cccdd04643a7d21d0ca5d8205b15ec0ea1be1c6b)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Changes in 4.14.333
tg3: Move the [rt]x_dropped counters to tg3_napi
tg3: Increment tx_dropped in tg3_tso_bug()
drm/amdgpu: correct chunk_ptr to a pointer to chunk.
net: hns: fix fake link up on xge port
tcp: do not accept ACK of bytes we never sent
RDMA/bnxt_re: Correct module description string
hwmon: (acpi_power_meter) Fix 4.29 MW bug
tracing: Fix a warning when allocating buffered events fails
scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
ALSA: pcm: fix out-of-bounds in snd_pcm_state_names
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
tracing: Always update snapshot buffer size
tracing: Fix incomplete locking when disabling buffered events
tracing: Fix a possible race when disabling buffered events
packet: Move reference count in packet_sock to atomic_long_t
parport: Add support for Brainboxes IX/UC/PX parallel cards
serial: sc16is7xx: address RX timeout interrupt errata
serial: 8250_omap: Add earlycon support for the AM654 UART controller
KVM: s390/mm: Properly reset no-dat
nilfs2: fix missing error check for sb_set_blocksize call
netlink: don't call ->netlink_bind with table lock held
genetlink: add CAP_NET_ADMIN test for multicast bind
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
Linux 4.14.333
Change-Id: Iebcaaf9d6c5e2ef71dd23c3c6246f6cef45d296a
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream.
This device has a silicon bug that makes it report a timeout interrupt
but no data in the FIFO.
The datasheet states the following in the errata section 18.1.4:
"If the host reads the receive FIFO at the same time as a
time-out interrupt condition happens, the host might read 0xCC
(time-out) in the Interrupt Indication Register (IIR), but bit 0
of the Line Status Register (LSR) is not set (means there is no
data in the receive FIFO)."
The errata description seems to indicate it concerns only polled mode of
operation when reading bit 0 of the LSR register. However, tests have
shown and NXP has confirmed that the RXLVL register also yields 0 when
the bug is triggered, and hence the IRQ driven implementation in this
driver is equally affected.
This bug has hit us on production units and when it does, sc16is7xx_irq()
would spin forever because sc16is7xx_port_irq() keeps seeing an
interrupt in the IIR register that is not cleared because the driver
does not call into sc16is7xx_handle_rx() unless the RXLVL register
reports at least one byte in the FIFO.
Fix this by always reading one byte from the FIFO when this condition
is detected in order to clear the interrupt. This approach was
confirmed to be correct by NXP through their support channels.
Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.331
locking/ww_mutex/test: Fix potential workqueue corruption
clocksource/drivers/timer-imx-gpt: Fix potential memory leak
clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
wifi: mac80211: don't return unset power in ieee80211_get_tx_power()
wifi: ath9k: fix clang-specific fortify warnings
wifi: ath10k: fix clang-specific fortify warning
net: annotate data-races around sk->sk_dst_pending_confirm
drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7
drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga
selftests/efivarfs: create-read: fix a resource leak
crypto: pcrypt - Fix hungtask for PADATA_RESET
RDMA/hfi1: Use FIELD_GET() to extract Link Width
fs/jfs: Add check for negative db_l2nbperpage
fs/jfs: Add validity check for db_maxag and db_agpref
jfs: fix array-index-out-of-bounds in dbFindLeaf
jfs: fix array-index-out-of-bounds in diAlloc
ALSA: hda: Fix possible null-ptr-deref when assigning a stream
atm: iphase: Do PCI error checks on own line
scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
tty: vcc: Add check for kstrdup() in vcc_probe()
i2c: sun6i-p2wi: Prevent potential division by zero
media: gspca: cpia1: shift-out-of-bounds in set_flicker
media: vivid: avoid integer overflow
gfs2: ignore negated quota changes
pwm: Fix double shift bug
media: venus: hfi: add checks to perform sanity on queue pointers
randstruct: Fix gcc-plugin performance mode to stay in group
KVM: x86: Ignore MSR_AMD64_TW_CFG access
audit: don't take task_lock() in audit_exe_compare() code path
audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()
hvc/xen: fix error path in xen_hvc_init() to always register frontend driver
PCI/sysfs: Protect driver's D3cold preference from user space
mmc: vub300: fix an error code
PM: hibernate: Use __get_safe_page() rather than touching the list
PM: hibernate: Clean up sync_read handling in snapshot_write_next()
mmc: meson-gx: Remove setting of CMD_CFG_ERROR
genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev
mcb: fix error handling for different scenarios when parsing
parisc: Prevent booting 64-bit kernels on PA1.x machines
parisc/pgtable: Do not drop upper 5 address bits of physical address
ALSA: info: Fix potential deadlock at disconnection
net: dsa: lan9303: consequently nested-lock physical MDIO
i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
media: sharp: fix sharp encoding
media: venus: hfi: fix the check to handle session buffer requirement
ext4: apply umask if ACL support is disabled
ext4: correct offset of gdb backup in non meta_bg group to update_backups
ext4: correct return value of ext4_convert_meta_bg
ext4: remove gdb backup copy for meta bg in setup_new_flex_group_blocks
scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
net: sched: fix race condition in qdisc_graft()
Linux 4.14.331
Change-Id: I1a1bce75363d3b2c731f3e947543c6506bed9817
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.14.330
i40e: fix potential memory leaks in i40e_remove()
tcp_metrics: properly set tp->snd_ssthresh in tcp_init_metrics()
tcp_metrics: do not create an entry from tcp_init_metrics()
wifi: rtlwifi: fix EDCA limit set by BT coexistence
thermal: core: prevent potential string overflow
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
ipv6: avoid atomic fragment on GSO packets
clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies
clk: keystone: pll: fix a couple NULL vs IS_ERR() checks
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
platform/x86: wmi: Fix probe failure when failing to register WMI devices
drm/rockchip: vop: Fix reset of state in duplicate state crtc funcs
drm/radeon: possible buffer overflow
drm/rockchip: cdn-dp: Fix some error handling paths in cdn_dp_probe()
ARM: dts: qcom: mdm9615: populate vsdcc fixed regulator
firmware: ti_sci: Mark driver as non removable
hwrng: geode - fix accessing registers
ARM: 9321/1: memset: cast the constant byte to unsigned char
ext4: move 'ix' sanity check to corrent position
RDMA/hfi1: Workaround truncation compilation error
sh: bios: Revive earlyprintk support
ASoC: Intel: Skylake: Fix mem leak when parsing UUIDs fails
mfd: dln2: Fix double put in dln2_probe
tty: tty_jobctrl: fix pid memleak in disassociate_ctty()
usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency
dmaengine: ti: edma: handle irq_of_parse_and_map() errors
misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()
USB: usbip: fix stub_dev hub disconnect
dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
pcmcia: cs: fix possible hung task and memory leak pccardd()
pcmcia: ds: fix refcount leak in pcmcia_device_add()
pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()
media: s3c-camif: Avoid inappropriate kfree()
media: dvb-usb-v2: af9035: fix missing unlock
pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
llc: verify mac len before reading mac header
tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
dccp: Call security_inet_conn_request() after setting IPv4 addresses.
dccp/tcp: Call security_inet_conn_request() after setting IPv6 addresses.
tg3: power down device only on SYSTEM_POWER_OFF
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
fbdev: fsl-diu-fb: mark wr_reg_wa() static
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
btrfs: use u64 for buffer sizes in the tree search ioctls
Linux 4.14.330
Change-Id: I2bb580dc3744e11c39a496a65530feaaf5fdb08a
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 11e7f27b79757b6586645d87b95d5b78375ecdfc ]
There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:
[<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
[<ffffffff81177342>] alloc_pid+0x72/0x570
[<ffffffff81140ac4>] copy_process+0x1374/0x2470
[<ffffffff81141d77>] kernel_clone+0xb7/0x900
[<ffffffff81142645>] __se_sys_clone+0x85/0xb0
[<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
[<ffffffff83965a72>] do_syscall_64+0x32/0x80
[<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.
The pid memleak is triggered by the following race:
task[sshd] task[bash]
----------------------- -----------------------
disassociate_ctty();
spin_lock_irq(¤t->sighand->siglock);
put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL;
tty = tty_kref_get(current->signal->tty);
spin_unlock_irq(¤t->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
if (tty) {
tty_lock(tty);
...
put_pid(tty->ctrl.pgrp);
tty->ctrl.pgrp = NULL; //It's too late
...
tty_unlock(tty);
}
The issue is believed to be introduced by commit c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().
To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".
Fixes: c8bcd9c5be24 ("tty: Fix ->session locking")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.14.329
mcb: Return actual parsed size when reading chameleon table
mcb-lpc: Reallocate memory region to avoid memory overlapping
virtio_balloon: Fix endless deflation and inflation on arm64
treewide: Spelling fix in comment
igb: Fix potential memory leak in igb_add_ethtool_nfc_entry
r8152: Increase USB control msg timeout to 5000ms as per spec
tcp: fix wrong RTO timeout when received SACK reneging
gtp: uapi: fix GTPA_MAX
i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
perf/core: Fix potential NULL deref
NFS: Don't call generic_error_remove_page() while holding locks
ARM: 8933/1: replace Sun/Solaris style flag on section directive
drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
kobject: Fix slab-out-of-bounds in fill_kobj_path()
f2fs: fix to do sanity check on inode type during garbage collection
nfsd: lock_rename() needs both directories to live on the same fs
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/mm: Simplify RESERVE_BRK()
x86/mm: Fix RESERVE_BRK() for older binutils
driver: platform: Add helper for safer setting of driver_override
rpmsg: Fix kfree() of static memory on setting driver_override
rpmsg: Fix calling device_lock() on non-initialized device
rpmsg: glink: Release driver_override
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
x86: Fix .brk attribute in linker script
ASoC: simple-card: fixup asoc_simple_probe() error handling
irqchip/stm32-exti: add missing DT IRQ flag translation
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
fbdev: atyfb: only use ioremap_uc() on i386 and ia64
netfilter: nfnetlink_log: silence bogus compiler warning
ASoC: rt5650: fix the wrong result of key button
fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
scsi: mpt3sas: Fix in error path
platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
ata: ahci: fix enum constants for gcc-13
remove the sx8 block driver
vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
tty: 8250: Remove UC-257 and UC-431
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for Intashield IS-100
Linux 4.14.329
Change-Id: If187990b63eb0e3467f9d483ab7638db2640d0f3
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.
The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.
Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.
Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.327
NFS/pNFS: Report EINVAL errors from connect() to the server
ipv4: fix null-deref in ipv4_link_failure
powerpc/perf/hv-24x7: Update domain value check
dccp: fix dccp_v4_err()/dccp_v6_err() again
team: fix null-ptr-deref when team device type is changed
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
clk: tegra: fix error return case for recalc_rate
xtensa: boot: don't add include-dirs
xtensa: boot/lib: fix function prototypes
parisc: sba: Fix compile warning wrt list of SBA devices
parisc: iosapic.c: Fix sparse warnings
parisc: irq: Make irq_stack_union static to avoid sparse warning
selftests/ftrace: Correctly enable event in instance-event.tc
ring-buffer: Avoid softlockup in ring_buffer_resize()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
fbdev/sh7760fb: Depend on FB=y
ata: ahci: Drop pointless VPRINTK() calls and convert the remaining ones
ata: libahci: clear pending interrupt status
watchdog: iTCO_wdt: No need to stop the timer in probe
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
serial: 8250_port: Check IRQ data before use
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
i2c: i801: unregister tco_pdev in i801_probe() error path
btrfs: properly report 0 avail for very full file systems
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-core: Fix port and device removal
ata: libata-sata: increase PMP SRST timeout to 10s
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
ext4: fix rec_len verify error
net/sched: sch_hfsc: Ensure inner classes have fsc curve
ata: libata: disallow dev-initiated LPM transitions to unsupported states
media: dvb: symbol fixup for dvb_attach() - again
scsi: zfcp: Fix a double put in zfcp_port_enqueue()
wifi: mwifiex: Fix tlv_buf_left calculation
ubi: Refuse attaching if mtd's erasesize is 0
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()
regmap: rbtree: Fix wrong register marked as in-cache when creating new node
scsi: target: core: Fix deadlock due to recursive locking
modpost: add missing else to the "of" check
ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
tcp: fix delayed ACKs for MSS boundary condition
sctp: update transport state when processing a dupcook packet
sctp: update hb timer immediately after users change hb_interval
cpupower: add Makefile dependencies for install targets
IB/mlx4: Fix the size of a buffer in add_port_entries()
gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()
RDMA/cma: Fix truncation compilation warning in make_cma_ports
RDMA/mlx5: Fix NULL string error
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
Revert "rtnetlink: Reject negative ifindexes in RTM_NEWLINK"
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
xen/events: replace evtchn_rwlock with RCU
Linux 4.14.327
Change-Id: Id05d43bbb2482e858390f6cb31f43ba16c669675
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.
In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
...
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:serial8250_handle_irq+0x7c/0x240
Call Trace:
? serial8250_handle_irq+0x7c/0x240
? __pfx_serial8250_timeout+0x10/0x10
Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.326
ARM: pxa: remove use of symbol_get()
mmc: au1xmmc: force non-modular build and remove symbol_get usage
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
USB: serial: option: add Quectel EM05G variant (0x030e)
USB: serial: option: add FOXCONN T99W368/T99W373 product
HID: wacom: remove the battery when the EKR is off
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
serial: sc16is7xx: fix bug when first setting GPIO direction
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
pinctrl: amd: Don't show `Invalid config param` errors
lib/ubsan: remove returns-nonnull-attribute checks
9p: virtio: make sure 'offs' is initialized in zc_request
ASoC: da7219: Flush pending AAD IRQ when suspending
ethernet: atheros: fix return value check in atl1c_tso_csum()
m68k: Fix invalid .section syntax
s390/dasd: use correct number of retries for ERP requests
fs/nls: make load_nls() take a const parameter
ASoc: codecs: ES8316: Fix DMIC config
security: keys: perform capable check only on privileged operations
net: usb: qmi_wwan: add Quectel EM05GV2
idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
netlabel: fix shift wrapping bug in netlbl_catmap_setlong()
bnx2x: fix page fault following EEH recovery
sctp: handle invalid error codes without calling BUG()
cifs: add a warning when the in-flight count goes negative
ALSA: seq: oss: Fix racy open/close of MIDI devices
powerpc/32: Include .branch_lt in data section
powerpc/32s: Fix assembler warning about r0
udf: Check consistency of Space Bitmap Descriptor
udf: Handle error when adding extent to a file
Revert "net: macsec: preserve ingress frame ordering"
reiserfs: Check the return value from __getblk()
fs: Fix error checking for d_hash_and_lookup()
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
regmap: rbtree: Use alloc_flags for memory allocations
spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe()
can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM
wifi: mwifiex: Fix OOB and integer underflow when rx packets
Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()
net: tcp: fix unexcepted socket die when snd_wnd is 0
crypto: caam - fix unchecked return value error
lwt: Check LWTUNNEL_XMIT_CONTINUE strictly
fs: ocfs2: namei: check return value of ocfs2_add_entry()
wifi: mwifiex: fix memory leak in mwifiex_histogram_read()
wifi: mwifiex: Fix missed return in oob checks failed path
wifi: ath9k: protect WMI command response buffer replacement with a lock
wifi: mwifiex: avoid possible NULL skb pointer dereference
wifi: ath9k: use IS_ERR() with debugfs_create_dir()
net: arcnet: Do not call kfree_skb() under local_irq_disable()
netrom: Deny concurrent connect().
ARM: dts: BCM53573: Add cells sizes to PCIe node
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
drm: adv7511: Fix low refresh rate register for ADV7533/5
of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()
smackfs: Prevent underflow in smk_set_cipso()
audit: fix possible soft lockup in __audit_inode_child()
ALSA: ac97: Fix possible error value of *rac97
drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
clk: sunxi-ng: Modify mismatched function name
PCI: Mark NVIDIA T4 GPUs to avoid bus reset
PCI: pciehp: Use RMW accessors for changing LNKCTL
wifi: ath10k: Use RMW accessors for changing LNKCTL
nfs/blocklayout: Use the passed in gfp flags
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
jfs: validate max amount of blocks before allocation.
fs: lockd: avoid possible wrong NULL parameter
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
drivers: usb: smsusb: fix error handling code in smsusb_init_device
media: dib7000p: Fix potential division by zero
media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()
media: cx24120: Add retval check for cx24120_message_send()
media: mediatek: vcodec: Return NULL if no vdec_fb is found
usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()
scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()
scsi: be2iscsi: Add length check when parsing nlattrs
scsi: qla4xxx: Add length check when parsing nlattrs
x86/APM: drop the duplicate APM_MINOR_DEV macro
scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly
scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly
dma-buf/sync_file: Fix docs syntax
media: go7007: Remove redundant if statement
USB: gadget: f_mass_storage: Fix unused variable warning
cgroup:namespace: Remove unused cgroup_namespaces_init()
scsi: core: Use 32-bit hostnum in scsi_host_lookup()
scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock
serial: tegra: handle clk prepare error in tegra_uart_hw_init()
amba: bus: fix refcount leak
Revert "IB/isert: Fix incorrect release of isert connection"
HID: multitouch: Correct devm device reference for hidinput input_dev name
rpmsg: glink: Add check for kstrdup
dmaengine: ste_dma40: Add missing IRQ check in d40_probe
igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: xt_u32: validate user space input
netfilter: xt_sctp: validate the flag_info count
igb: set max size RX buffer when store bad packet is enabled
PM / devfreq: Fix leak in devfreq_dev_release()
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch()
backlight/gpio_backlight: Compare against struct fb_info.device
backlight/bd6107: Compare against struct fb_info.device
backlight/lv5207lp: Compare against struct fb_info.device
media: dvb: symbol fixup for dvb_attach()
ntb: Drop packets when qp link is down
ntb: Clean up tx tail index on link down
ntb: Fix calculation ntb_transport_tx_free_entry()
Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
procfs: block chmod on /proc/thread-self/comm
parisc: Fix /proc/cpuinfo output for lscpu
dccp: Fix out of bounds access in DCCP error handler
X.509: if signature is unsupported skip validation
net: handle ARPHRD_PPP in dev_is_mac_header_xmit()
pstore/ram: Check start of empty przs during init
crypto: stm32 - fix loop iterating through scatterlist for DMA
scsi: qla2xxx: fix inconsistent TMF timeout
scsi: qla2xxx: Turn off noisy message log
fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
drm/ast: Fix DRAM init on AST2200
parisc: led: Fix LAN receive and transmit LEDs
parisc: led: Reduce CPU overhead for disk & lan LED computation
clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
x86/virt: Drop unnecessary check on extended CPUID level in cpu_has_svm()
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
pwm: lpc32xx: Remove handling of PWM channels
net: read sk->sk_family once in sk_mc_loop()
igb: disable virtualization features on 82580
net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr
af_unix: Fix data-races around user->unix_inflight.
af_unix: Fix data-race around unix_tot_inflight.
af_unix: Fix data-races around sk->sk_shutdown.
af_unix: Fix data race around sk->sk_err.
net: sched: sch_qfq: Fix UAF in qfq_dequeue()
kcm: Destroy mutex in kcm_exit_net()
igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80
igb: Change IGB_MIN to allow set rx/tx value between 64 and 80
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()
kcm: Fix memory leak in error path of kcm_sendmsg()
ixgbe: fix timestamp configuration code
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
parisc: Drop loops_per_jiffy from per_cpu struct
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
btrfs: output extra debug info if we failed to find an inline backref
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
wifi: ath9k: fix printk specifier
wifi: mwifiex: fix fortify warning
crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui()
tpm_tis: Resend command to recover from data transfer errors
alx: fix OOB-read compiler warning
drm/exynos: fix a possible null-pointer dereference due to data race in exynos_drm_crtc_atomic_disable()
md: raid1: fix potential OOB in raid1_remove_disk()
ext2: fix datatype of block number in ext2_xattr_set2()
fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()
jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
powerpc/pseries: fix possible memory leak in ibmebus_bus_init()
media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer
media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer()
media: af9005: Fix null-ptr-deref in af9005_i2c_xfer
media: anysee: fix null-ptr-deref in anysee_master_xfer
media: az6007: Fix null-ptr-deref in az6007_i2c_xfer()
iio: core: Use min() instead of min_t() to make code more robust
media: tuners: qt1010: replace BUG_ON with a regular error
media: pci: cx23885: replace BUG with error return
usb: gadget: fsl_qe_udc: validate endpoint index for ch9 udc
scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
serial: cpm_uart: Avoid suspicious locking
kobject: Add sanity check for kset->kobj.ktype in kset_register()
md/raid1: fix error: ISO C90 forbids mixed declarations
attr: block mode changes of symlinks
btrfs: fix lockdep splat and potential deadlock after failure running delayed items
nfsd: fix change_info in NFSv4 RENAME replies
mtd: rawnand: brcmnand: Fix crash during the panic_write
mtd: rawnand: brcmnand: Fix potential false time out warning
mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
net/sched: cls_fw: No longer copy tcf_result on update to avoid use-after-free
net/sched: Retire rsvp classifier
Linux 4.14.326
Change-Id: I22815ecf1b4b346f889ccaa561b7cb9a20f204ce
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
