Task packing has slightly impact for camera performance, so disable
it when camera is running.
Bug: 231074255
Test: build pass
Change-Id: Ic375103d4f7200dbceb013495c127e4a38d84654
Change list:
1.Set fallback value for repair center(not impact tuning)
Bug: 199029784
Test: Builds
Change-Id: Ia58aec716eb697d483a25f00e5244a3ea8ee8e70
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1.Set fallback value for repair center(not impact tuning)
Bug: 198765357
Test: Builds
Change-Id: I9c68a737ea1854e458e3b57b47a1c227a4f4a4bd
Signed-off-by: Robert Lee <lerobert@google.com>
Refine AZ and Surround recording parameters and related IIR2 tuning
Bug: 232162570
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I2cc34f9fd106578a4e2693b5183aa8879cf70465
Task packing may hurt app launch time, so disable it when app launch.
Bug: 201259891
Test: hint works
Change-Id: Ia28e96a25bbb82c74a3c9761a89683b2cc05938c
add mic gain on path "speaker-mic" from 0 to 22
Bug: 231909998
Test: mmap record
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I66de7c52c29ec3434a5cbed1799029fa5be05f71
AAC-VBR is more prefered than AAC-CBR for A2DP playback.
Bug: 200101304
Bug: 229939538
Test: dumpsys bluetooth_manager
Change-Id: I8930fdf383a4bbe481371b4aa4379f554bb9bd15
Re-enable BATOILO throttling for GPU/TPU to combat over current use
case.
Bug: 231484774
Test: Boot and confirm brownout mitigation for synthetic load
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Ia46ffd4bb2f5c246f48971aa8d4622b203bef1e7
add missing parameters for antenna pairs
Bug: 229426438
Signed-off-by: Victor Liu <victorliu@google.com>
Test: TH test comms/uwb/presubmit_2_cheetah
Change-Id: Ic7ddfa539ee85c4cfdec099767e322d1dd1742bf
With PixelWifiOverlay2022 in factory build, the overlays can be loaded
properly. Remove PixelWifiOverlay2022 and only add for normal build.
Test: overlays can be read properly in both normal and factory build
Bug: 228415213
Change-Id: I1ac9d8c020c6030e8a6f9759ae761e342adc956f
Driver actually does not support 6Ghz softAp at
current version. Hence, disable it
Bug: 231384422
Test: SoftAp can be enabled
Change-Id: I5433e05dd3cabb3f345c442522f9870a979939c6
In P22 (Pro), there is no scaling_min_compute_freq (b/228921300) and under STREAMING_STANDARD setting GPU min frequency is 302000 which is smaller than scaling_min_compute_freq 471000 on P21 (Whi).
In addition, on Pro GPU we expect 25~30% slow down in the same frequency compared to Whi.
To boost the performance of GPU for shots on Pro, we add a new powerhint mode GCA_CAMERA_SHOT_GPU_EXTREME which raises the GPU frequency to the maximum.
Bug: 230289913.
Test: Pushed to local C10 (EVT1.0, go/ab/8471717) and test with cl/444178649 (trace: https://ui.perfetto.dev/#!/?s=23af98f7bc1729faefb9df2c6890566d48111bc957592a7c5ffbdad87c3d2f2d)
Change-Id: Ib77bddbdac32e689120c513f38029be9eab96449
- Changes
New iteration of C10 MIX 103 for DF Merge
Full volume curve is integrated with LinkLaw for stereo playback
Reduced Sharpness of speech
CTS Validated
MPS validated w/ all stream paths, concurrencies, configurations w/ Waves Console on build:
TD1A.220406.001 (8410366)
Bug: 203817007
Test: 203817007#comment13, 203817007#comment20
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib95ccb669c8fd5369599bd530aeeb64197d18119
set config_wifiLinkLayerRadioStatsAggregationEnabled to true
to enable radio stats aggregation logic.
Bug: 211890916
Test: atest com.android.server.wifi.WifiVendorHalTest
Test: Manual - Dump the link layer stats and validated the results.
Change-Id: I8e5b86a917daa70d91de16b7f0a65e935e23b888
update default calibration
update japan specific calibration
use japan specific calibration
Bug: 229426438
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: Ifabe90d0b1361c64b588e032baeec49cc2184e7e
In previoues mechanism, p2p channel only can raise on same channel
while STA connected to 2.4GHz band. However, if device support DBS
mode, we should allow p2p to raise on 5GHz band for 230423673 higher
performance.
Bug: 230423673
Test: connect STA to 2.4GHz and verified that p2p is able to come up in
5GHz DBS mode.
Change-Id: Ibe996b9d54106734492b4ea2f7b816c3c8e52dbf
New thermal engine uses ODPM data. Since ravenclaw might not have
proper ODPM data, it can result in boot failures.
Bug: 230031671
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Id6ca70f22c841aea7a622304e0c757c93e7f55e2
High blocking zone: > 50,000 Lux and UI normal brightness 100%. Lock 60Hz
Bug: 222637975
Test: manual test
Change-Id: Iabd0409c3989cf0000030d93f70c8715eca4174a
Remove power rails from the thermal configuration for cloudripper.
Bug: 230031671
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Id37dbb99745c5cfbd7db9bcaf87241f39c5bf465
