Modified the outdoor range mapping in
the outdoor auto-brightness curve.
Bug: 213251504
Test: check the default curve
Change-Id: I387e87f343ffe7af72fb965f2c7ea05eb85dfda1
FM table Changelist:
C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
(1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
(2) Handsfree RX to HCO RX
Bug: 216258666
Test: b/216258666#comment19
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e
Modify name from sysfs_vendor_sched to proc_vendor_sched
Test: without avc denial
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie8fdb9e6634fb160f5cea64883bead93be13d93e
Add touch module into the init.insmod.xxx.cfg, it will be loaded after
all common modules in late-init. So the touch module won't be loaded in
off-mode-charge.
Bug: 227269826
Bug: 226881266
Test: Verify pass that the touch module is not loaded in off-mode-charge.
Change-Id: I3f3153afb75355020e17534838410050f20f02b2
FM table Changelist:
C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199
- Create separate powerhint json files for a0 soc
- Add control/switchon powerhints for all IPs
- Change thermal severity level to LIGHT
- Update trip temps as per policy
Bug: 194509203
Test: Build and boot on device. Check change of trip temperatures
after the thermal severity of LIGHT
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ibd19ea16d0fee25dec801b287e1eab05699a8d7f
Add cold temperature policy to combat sharp SOC% drop
Bug: 223420221
Test: Local peak current shock test at cold temperature
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If1db429a6c6c181735af001a72372f63a59d01c4
There is no swiotlb usage so we can append noforce to
remove 2MB reserved memory.
Bug: 226578178
Test: check total memory and io_tlb_nslabs
Signed-off-by: Martin Liu <liumartin@google.com>
Change-Id: I746e8a1d18d78243bfe6a0b7549d5cf09cc4e227
Due to b/214429812, QURGENT currently is not working properly, and cause
easily see EBUF full when capture on GCA. Temporary increase MIF clock to
mitigate memory interface congestion. We should revert this when
b/214429812 fixed.
Bug: 223734867
Test: P22 GCA capture
Change-Id: I0cc16d5bd83cb23462147c44547077665bc1dc73
Delay between NFC start and kernel has increased
This patchs update this delay to avoid lock at start
Bug: 223228405
Signed-off-by: Victor Liu <victorliu@google.com>
Change-Id: I1c91c73e420315e67ecfb076f90a0fcc20deb3fe
Update target load due to Pro mid CPU
this hint impact the high streaming use case like 60fps / 120fps and
240fps.
Bug: 222570798
Test:
1080p60 frame drops: 0.3% (before 3%)
slow mo 8x: frame drop 0%. 300mW saving on mem path
GCA test
CTS no regression
Passed:Tests Passed: 358, Failed: 4, Not found: 0, Status unknown: 0
Change-Id: Ie53f6eaadadf3540cf9a7b6cf7b801d46e943098
Bug: 225351394
Test: Verified twoshay not running in charger mode using cereal (P31701277).
Signed-off-by: Mark Chang <changmark@google.com>
Change-Id: Iad139a8340f5a8e6ee53ba434edc3b98379f68e2
Update uclamp_min to keep the little cores boost running on the same
frequenices.
Bug: 220975075
Test: build and boot to home
Change-Id: Idfc12229ec372288c29b61e2d965e13e480476e5
Add these property for the development on userdebug and eng only on P22.
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ic80ffbbfdcafda4bba9ed6edf01002d3db7e0c0b
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == true
use audio_policy_configuration_a2dp_offload_disabled.xml (a2dp X LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
(ro.bluetooth.leaudio_offload.supported == false OR persist.bluetooth.leaudio_offload.disabled == true)
use audio_policy_configuration_le_offload_disabled.xml (a2dp O LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
ro.bluetooth.leaudio_offload.supported == true AND persist.bluetooth.leaudio_offload.disabled == false
use default audio_policy_configuration.xml (a2dp O LE O)
Note:
The above settings are based on ro.bluetooth.a2dp_offload.supported == true condition
If ro.bluetooth.a2dp_offload.supported == false, the content of the default audio_policy_configuration.xml
file must be replaced by audio_policy_configuration_a2dp_offload_disabled.xml on the target
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I4a9bd45c1341100217ab32fd81f7421af00e059d
* set SarBackOffHighResolution = true for support power index
from 0 to 80 for setting backoff in 0.25 dB step
Bug: 170369474
Test: sending sar command with power cap index between 20 ~ 80 and
confirm the SAR backoff is workable.
Change-Id: I56d75abcff55e93554bf656fff164b861fe0e3c2
Disable wireless charging during drain, usb charging,
and charger stress test
- vendor.disable.wlc 1
If device is placed onto dreamliner and shutdwon(drain out),
it would boot up by DC_CHG and keep shutdown(0%)-boot up
(by DC_CHG) continuously. To avoid this symptom, limit wireless
current_max as 75000 after device boot up
- persist.vendor.limit.wlc.current=1
How to verify:
adb shell setprop vendor.disable.wlc 1
adb shell cat /sys/class/power_supply/wireless/online >>>> 0
adb shell setprop persist.vendor.limit.wlc.current 1
adb shell cat /sys/class/power_supply/dc/current_max >>>> 75000
Bug: 204211357
Test: set the property manually and query the result from file node.
Change-Id: I3ae2460f964b12924c3432d7f84203e2d802aa5f
Signed-off-by: Ken Tsou <kentsou@google.com>
(synced from commit 6e0bb1cb11b05768d04767e85cd28eaef212f305)
Disable the powerhint for F2FS gc_urgent mode, since we are going to
replace this with the smart idle maintenance service.
Test: turn on/off the screen & check /sys/fs/f2fs/dm-*/gc_urgent
Bug: 214430685
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Change-Id: I3e7fc4efdd6eed0a61fb2cedf3620907fece226d
P21 has been using GPU power hold during app launch to mitigate jank
from GPU power on latency.
However this same mechanism seems causing instability (may be related
to the new inter-frame power optimization). While the root cause is
being investigated, disable the boost.
Bug: 223828284
Test: Build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: Id04a1d09ebd5b36c1c7c55824da34bffb6435cab
