Compress-offload also needs to adjust the latency
to meet the av sync result.
Bug: 234104918
Test: Play AV sync video in YTMusic test apk
Change-Id: I45e4b2d2c477ae2eae14d7342e3a81c38ec61cb4
Bug: 234707775
Test: Boot and confirm its monitoring
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I531242c67dfc3d5542f15366f464b28fcbdc0c31
For C10_LL_Pt_Ls_mix3500M_volCurve_allModes_Speaker_Safe_ONEAL_V2.mps:
- Non media, update the speaker-safe preset for
Ringtone/Notification/Alarm stream
- sha1sum: b813efb994561b71715c075c0d34ad8c1a009ade
/vendor/etc/waves_preset.mps
For P10_LL_Pt_Ls_mix2000_volCurve_allModes_Speaker_Safe_ONEAL.mps:
- Non media, update the speaker-safe preset for
Ringtone/Notification/Alarm stream
- sha1sum: 32a42b5ad6f2c2b3b79b2a33d3f53329edf61047
/vendor/etc/waves_preset.mps
For audio_policy_volumes_C10_Update.xml:
- Revision for low volume to be compatible with the speaker-safe
preset mentioned above.
- Revision of full volume curve to be compatible with MIX3500M preset
for below stream type DTMF, System Sound, Enforced Audible.
- sha1sum: 918ebfef1da80f8caca117cc1da00f0a7eade6c1
/vendor/etc/audio_policy_volumes.xml
For audio_policy_volumes_P10_Update_V2.xml:
- Revision for low volume to be compatible with the speaker-safe
preset mentioned above
- Revision of full volume curve to be compatible with MIX2000 preset for
below stream type DTMF, System Sound, Enforced Audible
- sha1sum: 9333ef3a4359b6c5e5b29a3beb40c677f8961c5d
/vendor/etc/audio_policy_volumes.xml
Bug: 234590302
Bug: 234464916
Test: manual test
b/234464916#comment4
b/234590302#comment8
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I9fcaa0ac6f50af7f0728eb5a686b9866317a49d8
Since all of the BCL tzones are triggered from IRQ, we do not need to
monitor the tzones.
Bug: 197189623
Test: Pts Thermal test passing
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I96a245329e59a19f5baf15992c87a3ea568b7ddf
FM table change list:
1. HE
a) Fine tune HE BB SWB FFP, BVE, NS, ECDT
b) Fine tune HE BB NB/WB/SWB RX volume curve
2. HA
1) fine-tune C10 TMOUS tuning for DVT stage
2) fine-tune P10/C10 NB robustness tuning
3) fine-tune P10/C10 NB acoustic shock for generic
3. HH
a) P10/C10 fine tune NS performance
4. AMS : P10/C10 HA/HH/HE all enable AMS.
Bug: 234676284
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I9328b8c72c9b4799634bf3d6b63db6a4102fe571
Bug: 233018305
Bug: 233005340
Test: switch LE audio feature, and check LE audio functionality status
Change-Id: I5305f3b2b1fe19f8a1ddb42ee9101bfb64b9bce2
AoC can support mmap on BT both playback and recording
after gpar/322484.
Bug: 232205959
Test: Play MMAP games and OboeTester
Change-Id: Id696b578f4a2e3f94d6193e714b6d9f1ace6977a
Skip I signal by setting kI to 0 and use UClampMinInit as the display
update boost value.
Bug: 198663407
Test: Manual Test
Change-Id: I309ae4f63c4d7f50dc320aec28fffbe1473eb6e5
Sets the ML_ACC boost value to 650. The medium core's capacity is 763, so this means our benchmark process will always be scheduled onto the medium or big cores. We experimented with different uclamp values, and 650 is a good balance between power and performance.
Measurements:
MLPerf IC model Latency (ms) Power (mW) Energy/inference (mJ) MLPerf Scores
Uclamp = 512 0.981 3539 3.47 826
Uclamp = 600 0.973 3683 3.58 872
Uclamp = 650 0.899 3917 3.52 970 <- good balance
Uclamp = 700 0.892 4067 3.63 976
Uclamp = 800 0.875 4440 3.89 997
https://docs.google.com/presentation/d/1zx7sLkhOClmuRTCrq8-l3N1mZrrv7f-CtcdMuzV0eaI/edit?usp=sharing
Bug: 232183574
Test: MLPerf score on P22 improved significantly.
Change-Id: Ib93ecee5af3f1cbe83c5a96dc14b3a537db5abc8
To improve the return path latency, we want to keep the CPU at at least WFI state (Idle_1). The PMQos cpu_dma_latency knob prevents the CPU from falling below WFI state. This makes the return path CPU wakeup latency very good. Check with wvw@, the power impact shouldn't be too significant.
The average energy cost per inference dropped from 3.85 to 3.47 mJ. The reason why the power number is lower WITH disable-idle is that, due to better latency, we get to run more inferences given the same amount of time. This makes the average power consumption lower.
Measurement:
MLPerf IC model Latency (ms) Power (mW) Energy/inference (mJ) MLPerf scores
Default 1.35 2837 3.85 560
Disable CPU Idle 0.98 3539 3.47 826
https://docs.google.com/presentation/d/1zx7sLkhOClmuRTCrq8-l3N1mZrrv7f-CtcdMuzV0eaI/edit?pli=1#slide=id.g12dd9e50b4b_0_0
Bug: 232183574
Test: MLPerf on Android T. Performance improved. Verified on Perfetto.
Change-Id: Ia807bf0849e4d9b0b0e8c9510335129ca89e791f
FM table change list:
1. HE
a) Enble BVE for BB on NB,WB, SWB
b) Fine tune BB RX EQ on NB, WB.
2. HH
a) Fine Tune RX for dual speaker
b) Polishing SWB NS performance
3. HA
a) Update TMOUS tuning for P10/C10 on NB/WB/SWB
b) Fine tune C10 tuning setting for Generic on NB/WB/SWB
c) Fine tune P10 tuning setting for Generic on NB
d) Fine tune NS tuning for P10/C10 on SWB
Bug: 234079372
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: If380495da1e94fff33a2bdc9980f0e546d167e7f
Set the Bit 6 to true to enable the LE Audio Choppy Event Report
Bug: 233553754
Tag: #feature
Test: Verified the LE Audio Choppy Event will be reported
Change-Id: I8b193e9d51cde49b8494fa4f0e0a0cea3b77f2ff
Set it to "reset" in order to reset ST54K eSE at NFC hal init.
Bug: 232204531
Test: check eSE reset process starts at boot
Change-Id: I9f5863f963716ddceabbd540fbde32abec0a38b4
Add power hints handling for EMERGENCY severity. Control temperature
and switchon temperature are lowered when the pwoerhint is received.
Remove power hint handling for isp thermal zones as PID control loop
is not enabled for isp as of now.
Bug: 229014824
Test: Build and boot on device. Check control/switchon temp when
thermal severity reaches EMERGENCY level
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I2e4bab9495d76e231df8277f3bf4ef68d5a141af
vendor_config plays as another role to control the display config during
the boot time. To change the default configuration of the user selected
mode, we use persist config to store the value.
Bug: 232721840
Test: Boot w/ and w/o user selected configs and check the resolution
Change-Id: I8e6f551817e9b7cb747a7f5351430dd2ac9b4624
- preview of notification will be cut off slightly becuase of mute
duration in framework is 160ms (40*40)
- set mute duration of primary output from 160 ms to 40 ms.
Bug: 233176336
Test: preview notification/end call sound on voice/VoIP(Line)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I7f5225372c265cb22e74311b0805d16b1c68fd3d
Modified the indoor range mapping in
the indoor auto-brightness curve.
Bug: 200227638
Test: check the default curve
Change-Id: I7b9219023fabdefe05cb910666c0e0ff998ed06c
Since runtime resolution switching is enabled, the specific device
supports to run QHD displays at lower FHD resolutions. So we should
support both QHD/FHD resolution settings in PowerStats HAL.
Bug: 232313626
Test: dump power stats at QHD/FHD resolutions
Change-Id: I46a45c078da146a8ecbeb49af4765771a2c0b651
Signed-off-by: Darren Hsu <darrenhsu@google.com>
Update C10 virtual coefficients as per v0.6. No changes for P10
Bug: 232303785
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I2662aba527265d67acb1f5237e550eff75347ca8
we need disable uclamp_threshold and reduce_prefer_idle
under launch scenarios.
Bug: 232593932
Test: build pass
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I4b1f1fa04ee7c89f25500df74db49ad2fb67b2cb
Fix C10 AoA polarity by modifying LUT in config file
Bug: 233072004
Change-Id: Ic163f03efa14f3af38fff92902241cd09516546f
Signed-off-by: Victor Liu <victorliu@google.com>
No need to prevent uclamp.min update rate by Granularity.
There is no perf impact.
Bug: 232336917
Test: /data/nativetest64/libperfmgr_test/libperfmgr_test
Change-Id: I535a57b68da9e9b37f4126e46d0410ccb410be46
The impact of the change only aims to users who have never configed RRS
and those who do factory reset themselves.
Bug: 232536153
Test: factory reset the device and check RRS setting in FHD+
Test: configure RRS and check the config is stored after rebooting
Test: disable smooth display and check the expected refresh rate
Change-Id: I01c46ac2566f0b060fcf23a092601f05bbf568cb
