Change the period size of VoIP Record to 20ms.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 196912510
Test: Build pass
Change-Id: I6434a7596880712efa7cbfa03b3480efb5e2c2aa
Add a new virtual sensor VIRTUAL-SKIN-CHARGE dedicated for charging
and lower the temperature threshold for thermal severity.
Bug: 195619668
Test: Boot
Change-Id: Ia8901e55d161a9d989a3d8450b62efe844900765
- changes volume 1,2,3,4,5 (due to a sound quality noise floor issue)
Bug: 198224217
Test: manual power test (b/198224217#comment21)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ied7e88ad941e8a13e2080da6e2897b9541966dd0
R4O6
Update camcorder tunings files for FRC
Reason:
- The SA-lite pipeline is used for 3rd party camcorder/recorder and
need to be updated tuning for audio quality (b/185293492)
- There is e-Noise issue could be noticed when using 3rd party
camcorder/recorder
Change list:
Update audio_platform_configuration.xml file so that parameters in
SA-lite pipeline can be loaded correctly
Update template.xml file to enable feature swapping microphone
assessment in SA-lite pipeline
Update recording.gatf file for modifing tuning parameters
Validation:
3rd party camcorder/recorder function are good and validation was
used SD1A.210817.007 (7665414)
Bug: 197492283
Test: forrest build passed
Change-Id: Ifc66519c92935dc4bd14d68a85a491f96429272a
///R4
1. HHNB/WB/SWB double talk fine tune with v5.3.11 lib fix
2. Headset TTY VCO: sync the latest of HH TX
3. Headset Headphone : sync the latest of HH TX
4. BT HAC : sync the latest of HH TX
5. Headset FB tuning for NS
///O6
1. HHNB/WB/SWB double talk fine tune with v5.3.11 lib fix
2. Headset TTY VCO: sync the latest of HH TX
3. Headset Headphone : sync the latest of HH TX
4. BT HAC : sync the latest of HH TX
5. Headset FB tuning for NS
Bug: 197716271
Test: manual test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I6376ce7da579dcda09c6077182cd82c6fb2c2efb
Release Notes (R4):
- Retune top volumes for more balanced sound, less harsh
- Heavy emphasis on vocals, both depth and clarity
- DTMF volume curve reduced to better align w/ O6, F2, C2, B9
- SYSTEM volume curve reduced to better align touch sounds
- SYSTEM volume curve copied into AUDIBLE volume curve
Release notes (O6):
- Camera shutter (system sound) decreased volume curve to better align w/ R4/B9 and F2/C2
- Slight adjustment at min vol point for DTMF
- SYSTEM volume curve reduced to mitigate loud camera shutter
- SYSTEM volume curve copied into AUDIBLE volume curve
Bug:190960105
Test: High level tuning validation (b/190960105#comment15)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Icf0c9e921017b5e06ec950452a78a9d89acf86f2
Update the e-label of GR1YH and add the e-labels for GB7N6 and G9S9B.
Fixes: 187845531
Test: visual
Change-Id: I82bc0468167f9734442e90790ffe1b78d5e5979e
Update the e-label of GF5KQ and add the e-labels for GLU0G and G8V0U.
Fixes: 187846268
Test: visual
Change-Id: I76bf53297abf4d00051beda670d847477444f7b6
There's still 2px offset when transitioning from
KeyguardStatusBarView to PhoneStatusBarView.
To make the visual perfect, we can adjust more 0.5dp.
Test: Visual
Test: atest SystemUITests
Bug: 195670442
Change-Id: I84d10f2dad665fcbdb01665f5056d08b3c20e0d7
The speaker calibration step is changed in factory and the speaker
calibration file's permission is incorrect. Then audio hal cannot read
speaker.cal file to apply it and only apply default cal value.
Correct the file mode when init.
Bug: 197039088
Test: push the script into device and check file mode after rebooting device
Signed-off-by: Robert Lee <lerobert@google.com>
Change-Id: I1339f006f4477288cb41d07cb32caba0921b6e09
Bug: 196833426
Test: Boot and confirm proper level set
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Iff9e77c39de546c53fd2404d3a0e15408b0e856d
1. Avoid integral and derivative computation when thermal > MODERATE
2. Adjust cdev weight to make LC throttling become more aggressive
Bug: 195459720
Test: test burn8
Change-Id: I2d40e8cd95f6c67ff48574b2b8405c9545a67611
Update below stream's volume curves to refine system sound output
from speaker too loud in the lowest volume.
<volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_SPEAKER">
Refine audio-tables.mk location to make sure the xml is updated.
Bug: 195387287
Test: QMC verified
Test: Local built and verified vendor/etc/audio_policy_volumes.xml is correct one
Signed-off-by: Robert Lee <lerobert@google.com>
Change-Id: I13188d7470092448a2660f89d43cf13a56c22edc
Per quality testing of Face Auth, noticed 2 failures out of 30 tries of
Face Auth. Per thermal log, tpu_cooling state changed 2 times. Over
throttling on TPU by setting tpu_cooling state to 3 may cause Face Auth
to fail. Changing it to 3.
Bug: 181348043
Bug: 196315467
Test: Local test and verify Face Auth
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I535f0734c247b2041af0f7cc69ef8e6706c9a909
Bug: 181348043
Test: Local test and verify trip point
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Ifea3ea71e658b1ca0d9d87c2ca1cdb16b290a6b9
Add cooling device for soft_ocp_warn.
Bug: 188701596
Test: Local test and check trip point
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Ife680d79467d9a07e14cc890d60f35aba02c0b65
Update pid related settings to get thermal pid control work for o6
proto.
Bug: 195617178
Test: run burn8 and emul_temp to check if pid thermal control work
Change-Id: I82e1a9271cef480b7a4cf33fe0d827316521e93c
There are two addtional OPPs for MID cpu so update power table to keep
align with dvt power table dump data to kick off MID cpu throttling in
time for thermal protection.
Bug: 195617178
Test: use emul_temp and burn8 to check throttling worked as expected
Change-Id: I2b9b3549ab97409920acdd7d0e9f1946bcf0678b
Adjust the system_icons_keyguard_padding_end for O6/R4
Consider below scenario:
1. Enable/Disable multi-user: This case must have x-asix shift due to
home StatusBar did not designed to show avator icon
2. Keyguard/Home StatusBar alignment
3. w/ & w/o privacy dot
4. w/ & w/o plug-in USB cable
5. w/ & w/o show battery percentage
Test: build and check the visual
Bug: 195670442
Change-Id: I783c026e46d7cc01839a4e56fed9fdb89ca6b194
This should not scale with density size increases b/c the
sensor size is fixed.
Test: manual
Change-Id: I84cd73992b657ee292873fd7ba4bf6e73fc6b349
Fixes: 195564809
HAL can get the device latency from bluetooth headset.
We just to set the latency of the device side.
Bug: 195166550
Test: av sync
Change-Id: Id64b7ea796ddc4de996817d0553f1855b4d9485a
///R4
1. HHSWB BVE fine tuning ( by new FM lib fixed - b/194775936)
///O6
1. HHSWB BVE fine tuning ( by new FM lib fixed - b/194775936)
Bug: 194775936
Test: manual test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I25a740c49ed85c0ac07dce6475af95453c126bad
- Add TempPath field to support force update for on-board ntc
thermistors.
- Update hysteresis for trigger sensors to prevent genlink storm
Bug: 191971470
Test: check if thermhal polling can start in time by burn8
Change-Id: I855ccee34602268315d7cd16896cba19b954d115
