HK3 DVT1.0 Beta-DM04 Exit recording tuning table update
change recording.gatf and template.xml this time.
DVT1.0 table check-in for DVT1.0 Beta-DM04 Exit
Change list of new table:
Camcorder path
1. AGC ideal:-34 minGain:-29
2. Fine tune IIR1
3. Fine tune Surround/AZ parameters, compensate low frequency for AZ
4. MBDRC threshold low/mid/high -85/-84/-84, -33/-33/-33
5. SNS parameters update and the template update -> bin threshold(173/202/254/364/513)
Mic path
1. disable AGC module on mono/stereo mode
Test: verify by HW darren
Bug: 288210161
Bug: 288210947
Change-Id: Ifcd69430da41f89b5e8022535c1984ab49038680
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Zuma 8K won't be shipped on P23 devices, so "8K" should be removed
from media_profiles as it's visible to the public.
This CL removes 8K support on udc-d1-dev, which is the branch for
launching P23.
To continue developing 8K using P23 devices, we'll re-enable 8K support
on udc-qpr-dev with a follow-up CL.
Bug: 288304801
Test: python gca_smoke.py
Test: CTS & PTS
Change-Id: Ie0c35ea2c2bb1ab49912b69079b2038b42f632f1
For the current design, thermalHAL will only enable one hint base on the current severity and disable the previous one. As a result, the power hint of higher severity should maintain the actions from lower severity which cause the larger config size and maintenance effort.
The new thermalHAL design will keep the lower severity's hint enabled, so we could remove the duplicate policies from higher level.
Bug: 241737737
Test: verified shiba with emul_temp
Change-Id: I352cb3dc52440373a6eebdebe77fb8c5cc24890d
to mitigate potential kernel panic, load g2d only at the
same time.
Test: Build pass
Bug: 287727823
Change-Id: I8b4eac1875d3b394fc9ab651959db54c53967326
Signed-off-by: Chungkai Mei <chungkai@google.com>
- HK3 Handset.dat (Owen)
1. Modify WB Rx DRC Gain to 8.5dB and Tx DRC Gain to 14dB for DVT device in Handset | Voice_Generic
2. Modify SWB Tx DRC Gain to 15dB for DVT device in Handset | Voice_Generic
3. Modify NB Rx FDEQ(v0607), SPK_Vol, and DRC Gain(10dB) for T-MOS/VolStrp in Handset | T-MOBILE-US
4. Modify SWB Tx NS version to v0218 for b/286507869 in Handset | Voice_Generic
5. Copy item 4 to Handset | T-MOBILE-US & RESERVE2 and Handset_HAC | Voice_Generic, Tmobile-US, RESERVE2
6. Modify TX FDDRD DEADMIC_SILENCE_TH to 0x0006 and MIC_DEGRADE_TH to 0x2800 for all Tx
- HK3 Handsfree (Ricky)
1. Enable AMS with v1 fine tune parameter in all bands
Files from the latest attachment on b/287412136
Bug: 287412136
Test: verified by rickycheng@
Change-Id: Ia1f2c7349eee98bdaa75892793ee5b87c421b058
- SB3 Handset (Duncan)
1. HA update with mic health parameter in all bands
- SB3 Handsfree (Ricky)
1. Enable AMS with v1 fine tune parameter in all bands
2. Fix long distance speech intermittent in WB
3. DVT fine-tuning - includes TX Pre-EQ, RFR, volume curve in all bands.
Files from the latest attachment on b/287412815
Bug: 287412815
Test: verified by rickycheng@
Change-Id: Ieb41ea6dc9c2bc9c335a1681dc1c670e65737e0d
Set 120Hz if lower than 8 nits and 5 lux.
Bug: 282725148
Test: Set brightness and check refresh rate
Change-Id: I0039ccb2f112c2a4b77960452907bccb7bd0f6ca
Signed-off-by: Chris Lu <luchris@google.com>
Bug: 284500427
Test: Ongoing. with ag/23546319
- Create powerhint for project11. Powerhints are branched from
CAMERA_STREAMING_STANDARD with some modification
- Add back MIFTargetNode
- Set MIFTargetNode value to 20 80 to avoid MIF operation point go to max
- Value need more test before final submission.
Change-Id: I47659cca7e0a26e240e91b1d1a49dc61d76b6b90
Bug: 280258727
Test: Found regression in b/286002292, local test.
Change-Id: I78db6fefe042f0b380e48f1fad5ccb477dd38dbe
Signed-off-by: paulsu <paulsu@google.com>
Reduce StaleTimeFactor for power saving
Bug: 269523712
Test: boot and run uibench
Change-Id: I1bc2483a30c11bfe840f796ddc11e3c9496f5e78
Signed-off-by: Ziyi Cui <ziyic@google.com>
